DOT050F-012.8M

2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851- 4722
Fax: 630- 851- 5040
www.conwin.com
Precision
TCXO / VCTCXO
Models DOT050F / DOT050V
Description:
The Connor-Winfield's DOT050F / DOT050V
are Surface Mount, 9x14mm, 3.3V, LVCMOS
Temperature Compensated Crystal Oscillator
(TCXO / VCTCXO) designed for applications
requiring very tight frequency stability and
low phase noise. The RoHS compliant true
surface mount package is designed for high-
density mounting and is optimum for mass
production.
Features:
TCXO Model: DOT050F
VCTCXO Model: DOT050V
3.3 Vdc Operation
Frequency Stability: ±50 ppb
Temperature Range: 0 to 70°C
LVCMOS Output Logic
9x14mm SMT Package
Tape and Reel Packaging
RoHS Compliant / Pb Free
Bulletin
TX395
Page
1 of 4
Revision
03
Date
29 Sept 2014
US Headquarters:
630-851-4722
European Headquarters:
+353-61-472221
1330
12.8 MHz
DOT050F
Operating Specifications
Parameter Minimum Nominal Maximum Units Notes
Frequencies Available (Fo) - 10,12.8, 19.2 19.44 or 20 - MHz
Frequency Calibration @ 25 °C -1.0 - 1.0 ppm 1
Frequency Stability -50 - 50 ppb 2
Aging / Day -10 - 10 ppb 3
Aging / First Year -300 - 300 ppb
Total Frequency Tolerance -4.6 - 4.6 ppm 4
Frequency vs. Load Stability -20 - 20 ppb ±5%, 5
Frequency vs. Voltage Stability -20 - 20 ppb ±5%
Operating Temperature Range: 0 - 70 °C
Supply Voltage (Vcc) 3.135 3.3 3.465 Vdc ±5%
Supply Current - 6 10 mA
Period Jitter - 3 5 ps rms
Integrated Phase Jitter (12 KHz to Fo/2) - 0.5 1.0 ps rms
Short Term Stability - - 1.0E-9/s
SSB Phase Noise Fo = 12.8 MHz
@ 1Hz offset - -70 - dBc/Hz
@ 10Hz offset - -100 - dBc/Hz
@ 100Hz offset - -130 - dBc/Hz
@ 1KHz offset - -148 - dBc/Hz
@ 10KHz offset - -154 - dBc/Hz
@ 100KHz offset - -155 - dBc/Hz
Start-up Time - - 10 ms
Absolute Ratings: Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the
device. These are stress ratings only. The functional operation of the device at those or any other conditions beyond those
indicated under "recommended operating conditions" is not implied. Exposure to conditions outside the "recommended
operating conditions" for any extended period of time may adversely impact device reliability and result in failures not
covered by warranty.
Absolute Maximum Ratings
Parameter Minimum Nominal Maximum Units Notes
Storage Temperature -55 - 125 °C
Supply Voltage (Vcc) -0.5 - 4.5 Vdc
Input Voltage -0.5 - Vcc+0.5 Vdc
Available at Digi-Key
www.digikey.com
Notes:
1. Frequency referenced to Fo @ 25°C, for VCTCXO models Vc = 1.65V
2. Frequency stability vs. change in temperature. [±(Fmax - Fmin)/(2*Fo)].
3. After 30 days of operation.
4. Inclusive of calibration @25°C, frequency vs. change in temperature, change in supply voltage(±5%), load change(±5%)
and 15 years aging.
5. Referenced to 15 pF.
Specifications subject to change without notification. See Connor-Winfield's website for latest revision. All dimensions in inches.
© Copyright 2014 The Connor-Winfield Corporation Not intended for life support applications.
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851- 4722
Fax: 630- 851- 5040
www.conwin.com
Environmental Characteristics
Shock 500 G’s 1ms, Half sine, 3 shocks per direction, per MIL- STD 202F, Method 213B Test Condition D.
Sinusoidal Vibration 0.06” D.A. or 10G’s Peak, 10 to 500 Hz, per MIL-STD 202F, Method 204D, Test Condition A.
Random Vibration 5.35 G’s rms. 20 to 2000 Hz per MIL-STD-202F, Method 214,Test Condition 1A, 15 minutes each axis.
Moisture 10 cycles, 95% RH, Per MIL-STD-202F, Method 112.
Marking Permanency Per MIL-STD-202F, Method 215J.
Package Characteristics
Package consisting of a FR4 substrate and a Ryton-R4 cover. Water Resistant, non-hermetic seal
Soldering Characteristics
RoHS compliant lead free. See soldering profile on page 4.
Recommended Cleaning Process
Wash only in an in-line high pressure wash station that has an air knife and drying capabilities.
(Drying temperature range from 85° to 100°C)
Ordering Information
TCXO: DOT050F-010.0M, DOT050F-012.8M, DOT050F-019.2M, DOT050F-019.44M or DOT050F-020.0M
VCTCXO: DOT050V-010.0M, DOT050V-012.8M, DOT050V-019.2M, DOT050V-019.44M or DOT050V-020.0M
LVCMOS Output Characteristics
Parameter Minimum Nominal Maximum Units Notes
Load - 15 - pF
Output Voltage
(High) (Voh) 90% Vcc - - Vdc
(Low) (Vol) - - 10% Vcc Vdc
Output Current
(Ioh) - - 4 mA
(Iol) -4 - - mA
Duty Cycle at 50% of Vcc 45 50 55 %
Rise / Fall Time 10% to 90% - 4 8 ns
DOT050V Models Input Characteristics
Parameter Minimum Nominal Maximum Units Notes
Control Voltage (Vc) 0.3 1.65 3.0 Vdc
Tuning Frequency ±10.0 - - ppm
Input Impedance 100K - - Ohm
Linearity ±5 - - %
Slope Positive
Bulletin
TX395
Page
2 of 4
Revision
03
Date
29 Sept 2014
Specifications subject to change without notification. See Connor-Winfield's website for latest revision. All dimensions in inches.
© Copyright 2014 The Connor-Winfield Corporation Not intended for life support applications.
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851- 4722
Fax: 630- 851- 5040
www.conwin.com
Suggested Pad Layout
1: TCXO = N/C, VCTCXO =Vc
2: Do Not Connect
3: Ground
4: Output
5: Do Not Connect
6: Supply Voltage (Vcc)
Pad Connections
Package Layout
E
1344
DOT050F
12.8MHZ
L
e
b
Top View
Side View
Bottom View
DNC = Do Not Connect
A
D
A1
Pin 1
Index
Marking
C
L
C
L
Side View
Pin 1 ID
mm inches
Symbol Min Nom. Max. Min Nom. M ax.
A 6.60 6.73 6.86 0.260 0.265 0.270
D 8.89 9.02 9.15 0.350 0.355 0.360
E 13.34 13.47 13.60 0.545 0.550 0.555
A1 - 1.58 - - 0.062 -
L - 1.52 - - 0.060 -
b - 1.02 - - 0.040 -
e - 2.54 - - 0.100 -
DNC
DNC
Keep Out Area Note: Do not route any traces
under the device in the keep out area.
Keep Out Area
0.085
(2.03mm)
0.290
(7.37mm)
Top
View
0.100
(2.54mm)
1
2
3
4
5
6
0.060
(1.52mm)
Phase Noise Plot
Output Waveform
1V/Div
Test Circuit
TCXO = N/C
VCTCXO = Vc
DNC
2
DNC
15 pF
0.01uF
10uF
to
100 uF
DNC = Do Not Connect
Output
Bulletin
TX395
Page
3 of 4
Revision
03
Date
29 Sept 2014

DOT050F-012.8M

Mfr. #:
Manufacturer:
Description:
XTAL OSC TCXO 12.8000MHZ LVCMOS
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union