OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

DXP18CN7515TL

P1-P3P4-P6P7-P9
Spec No.JEFK243A-0003E-01
P4/9
MURATA MFG.CO.,LTD
Reference Only
0
0.5
1
1.5
2
2.5
3
0 100 200 300 400 500 600 700 800 900
Freq[MHz]
IL[dB]
18
20
22
24
26
28
30
32
34
0 100 200 300 400 500 600 700 800 900
Freq[MHz]
Isolation[dB]
10. Frequency Characteristics (Typ.)
11. Specification of Packaging
11.1 Appearance and Dimensions ( 8mm-wide,Plastic tape)
11.2 Specification of Taping
(1)Packing quantity(Standard quantity) 5000 pcs. / reel
(2)Packing Method
Products shall be packaged in each embossed cavity of plastic tape and sealed with cover tape.
(3) Spliced point
The cover tape have no spliced point.
(4) Sprocket Hole
Sprocket hole shall be located on the left hand side toward the direction of feed.
(5)Missing components number
Missing components number within 0.1% of the number per reel or 1 pc, whichever is greater, and are not
continuous. The specified quantity per reel is kept.
11.3 Pull Strength of the Tape Package
Plastic Tape 5N min.
Cover Tape 10N min.
11.4 Peeling force of the Cover Tape
0.2 to 0.7N(Minimum value is Typical)
Peeling verosity is 300 mm / min
165 to 180 degree
F
Cover tape
Plastic tape
DXP18CN7510T
1.75±0.1
(2.75)
3.5±0.05
0.1
0
1.5±
4.0±0.1
0.20±0.05
1.82±0.05
0.90±0.05
4.0±0.1
2.0±0.05
8.0±0.2
0.6±0.05
Sproket Hole
Direction of feed
0
0.5
1
1.5
2
2.5
3
0 100 200 300 400 500 600 700 800 900
Freq[MHz]
IL[dB]
18
20
22
24
26
28
30
0 100 200 300 400 500 600 700 800 900
Freq[MHz]
Isolation[dB]
8
8.5
9
9.5
10
10.5
11
11.5
12
0 100 200 300 400 500 600 700 800 900
Freq[MHz]
分配量[dB]
Insertion Loss [dB]
Coupling [dB]
Isolation [dB]
DXP18CN7515T
13.5
14
14.5
15
15.5
16
16.5
0 100 200 300 400 500 600 700 800 900
Freq[MHz]
分配量[dB]
Insertion Loss [dB]
Coupling [dB]
Isolation [dB]
Spec No.JEFK243A-0003E-01
P5/9
MURATA MFG.CO.,LTD
Reference Only
11.5 Dimensions of Leader-tape, Trailer and Reel
11.6 Marking for reel
Customer part number, MURATA part number, Inspection number(1), RoHS Marking(2), Quantity, etc
1) « Expression of Inspection No. » □□
OOOO 
(1) (2) (3)
(1)
Factory Code
(2) Date First digit : Year / Last digit of year
Second digit : Month / Jan. to Sep. 1 to 9, Oct. to Dec. O,N,D
Third, Fourth digit : Day
(3) Serial No.
2) « Expression of RoHS Marking » ROHS – Y
(△)
(1) (2)
(1)
RoHS regulation conformity parts.
(2) MURATA classification number
11.7 Marking for Outside package
Customer name Purchasing Order Number, Customer Part Number, MURATA part number,
RoHS Marking (2), Quantity, etc
11.8 Specification of Outer Case
Outer Case Dimensions
(mm)
Standard Reel Quantity in Outer Case
(Reel)
W D H
186 186 93 5
Above Outer Case size is typical. It depends on a quantity of an
order.
12. △
!
Caution
Limitation of Application
Please contact us before using our products for the applications listed below which require especially
high reliability for the prevention of defects which might directly cause damage to the third party's life, body
or property.
(1) Aircraft equipment (6) Transportation equipment (vehicles, trains, ships, etc.)
(2) Aerospace equipment (7) Traffic signal equipment
(3) Undersea equipment (8) Disaster prevention / crime prevention equipment
(4) Power plant control equipment (9) Data-processing equipment
(5) Medical equipment (10) Applications of similar complexity and / or reliability to the
applications listed in the above.
13. Notice
Products can only be soldered with reflow.
This product is designed for solder mounting.
Please consult us in advance for applying other mounting method such as conductive adhesive.
13.1 TN (Termination) Terminal
Please terminate TN terminal with 75 ohm to the circuit ground, unless otherwise, it may affect on the
performance of this part.
Empty tape
190 min.
Leader
Trailer
Top tape
2.0±0.5
13.0±0.2
21.0±0.8
180±
60±
9±
13±1.4
1
0
0
3
Direction of feed
210 min.
160 min.
1
0
Label
W
D
Label
H
Spec No.JEFK243A-0003E-01
P6/9
MURATA MFG.CO.,LTD
Reference Only
13.2 Flux and Solder
Flux
Use rosin-based flux, (with converting chlorine content 0.06 to 0.1(wt)%. ),
but not highly acidic flux
(with Halogen content exceeding 0.2(wt)% conversion to chlorine).
Do not use water-soluble flux.
Solder Use Sn-3.0Ag-0.5Cu solder
Standard thickness of the solder paste should be 100 to 150µm.
13.3 Standard Land Dimensions (Reflow)
(in mm)
13.4 Assembling
<Thermal Shock>
Pre-heating should be in such a way that the temperature difference between solder and
ceramic surface is limited to 100°C MAX. Also cooling into solvent after soldering
should be in such a way that the temperature difference is limited to 100°C max.
13.5 Standard Soldering Condition
(1) Soldering Condition
Standard soldering profile and the limit soldering profile is as follows.
The excessive limit soldering conditions may cause leaching of the electrode and / or resulting
in the deterioration of product quality.
Standard Profile Limit Profile
Pre-heating 150～180°C 、90s±30s
Heating above 220°C、30s～60s above 230°C、60s max.
Peak temperature 245±3°C 260°C、10s
Cycle of reflow 2 times 2 times
150
90s±30s
Time（ｓ）
245±3℃
Tem
p
.
(℃)
220℃
30～60s
180
260℃/10s
230℃
60s max.
Limit Profile
Standard Profile
Resist
Copper foil pattern
1.30
0.40
0.20
0.40
0.20
0.45
No pattern
P1-P3P4-P6P7-P9

DXP18CN7515TL

Mfr. #:
Buy DXP18CN7515TL
Manufacturer:
Murata Electronics
Description:
Signal Conditioning 0603 75ohm 15dB Coupler
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet