FRDM-MC-LVMTR Datasheet FRDM-MC-LVMTR, FRDM-KV31F | P1-P3

TARGET APPLICATIONS

} BLDC motors

} PMSM motors

} ACIM motors

Built upon the Cortex-M4 core running at 100/120 MHz

with DSP and floating point unit, it features dual 16-bit

analog-to-digital converters (ADCs) sampling at up to 1.2

mega samples per second (MSPS), multiple motor control

timers, 64 to 512 KB of flash memory and a comprehensive

enablement suite from proprietary and third-party resources,

including reference designs, software libraries and motor

configuration tools.

The KV3x is the first device in the Kinetis portfolio to include

Kinetis Motor Suite (KMS). KMS is a software solution that

enables the rapid configuration of motor drive systems, and

accelerates development of the final motor drive application,

while improving overall motor system performance.

FEATURES AND BENEFITS

} 100/120 MHz Cortex-M4 core with DSP and floating

point unit—improves performance in math-intensive

applications (e.g., processing of sensorless FOC (field

oriented control) algorithms)

} 2x 16-bit ADCs with two capture and hold circuits and up

to 1.2 MSPS sample rate—simultaneous measurement of

current and voltage phase, reduced jitter on input values

improving system accuracy

} Up to 2 x 8-channel and 2 x 2-channel programmable

FlexTimers—high-accuracy PWM generation with

integrated power factor correction or speed sensor

decoder (incremental decoder/hall sensor)

} Up to 2 x 12-bit DAC and 2 x ACPMs (analog

comparators)—overcurrent and overvoltage fault detection,

reduced BOM costs. ADC and ACMP interconnect with

PWM and PDB (programmable delay blocks) for real-time

hardware control

} 4- or 16-channel DMA—reduced CPU loading for improved

application performance

} Dual watchdogs—compliance with IEC 60730 safety

regulation requirements

The Kinetis KV3x family of microcontrollers is a high-performance solution for BLDC,

PMSM and ACIM motor control applications. Enabled with Kinetis Motor Suite.

ARM

Cortex

-M4

MCU family for

BLDC, PMSM and

ACIM motor control

Kinetis KV3x MCU Family

DEVELOPMENT TOOLS

Kinetis Motor Suite (KMS) is a software

solution that enables the rapid

configuration of motor drive systems,

accelerates development of the final

motor drive application whilst improving

overall motor system performance due

to its unique SpinTAC™ enabled speed

controller. Tuning and optimization is

carried out via a simple graphical user

interface that enables a developer to

easily identify their motor, tune that

motor using just one control dial and

build a state machine to control the

various speed transitions of the motor.

HVP-MC3PH

The platform enables development

of three-phase PMSM, BLDC and

ACIM motor control and power factor

correction (PFC) solutions in a safe high-

voltage environment.

Compatible with the HVP-KV31F120M

controller card, input voltage is 85–240

V AC, with output power of the motor

stage up to 1 KW and the ability to

drive a 1.2 Hp motor.

FRDM-KV31F

An ultra-low-cost development

platform for Kinetis KV3x MCUs. The

FRDM-KV31F hardware is form-factor

compatible with the Arduino™ R3 pin

layout, providing a broad range of

expansion board options. Combine this

with the FRDM-MC-LVPMSM or FRDM-

MC-LVBLDC shields and the FRDM-

MC-LVMTR to create a fully-enabled

development platform for PMSM or

BLDC motor control.

TWR-KV31F120M

The Tower System MCU module is a

modular development platform that

features the KV3x MCU in a 100 LQFP

package, integrated OpenSDA debug

adapter and is compatible with the

TWR-MC-LV3PH three-phase motor

peripheral module.

TWR-MC-LV3PH

The TWR-MC-LV3PH low-voltage, three-

phase motor control Tower

System

peripheral module provides a complete

motor control reference design kit for

developing BLDC and PMSM motor

solutions, it includes a three-phase

motor and motor drive circuitry.

Integrated Development

Environment (IDE)

Kinetis KV3x MCUs are supported by

Kinetis Design Studio, IAR Embedded

Workbench

for ARM and ARM Keil

Microcontroller Development Kit. All IDEs

support the Processor Expert auto code

generator.

Reference Designs Built on Embedded

Motor Control Libraries

} Extensive suite of complimentary

reference designs for ACIM, BLDC

and PMSM motor control built on

NXP’s Embedded Software libraries

and motor configuration tools.

} Complex real-time control applications

} Core self-test libraries for simpler

IEC 60730 certification

FreeMASTER

FreeMASTER is a free and simple, yet

highly customizable real-time debug

monitor and data visualization tool that

enables real-time data access.

Motor Control Toolbox

Motor control development toolbox is a

comprehensive collection of tools that

plug into MATLAB™/Simulink™ design

environment to support rapid application

development targeting Kinetis KV MCUs.

KINETIS KV3x MCU FAMILY BLOCK DIAGRAM

Programmable

Delay Block

Debug

Interfaces

DSP

Floating-Point

Unit (FPU)

Interrupt

Controller

ARM

Cortex

-M4 100/120 MHz

4-/16-Ch. DMA

Low Leakage

Wake-up Unit

Program Flash

up to 512 KB

SRAM

up to 96 KB

Serial Programming

Interface (Export)

FlexBus External

Bus Interface

BOOT Flash SRAM Retention

Cyclic Redundancy

Check (CRC)

Internal and

External Watchdogs

Flash Access

Controller

2 x 16-bit ADC

2 x ACMP

with 6-bit DAC

Up to 2 x 12-bit DAC

Voltage Reference

FlexTimers

Periodic Interrupt

Timer

Low-Power Timer

2 x DSPI

4 x UARTs

GPIO

Core System Memories Clocks

Security

and Integrity

Analog Timers

Communication

Interfaces

HMI

Phase-Locked Loop

Frequency-Locked

Loop

Low-/High-

Frequency Oscillators

Unique ID

2 x I

Optional Feature

Internal Reference

Clocks

KINETIS KV3x MCU FAMILY

PART NUMBER

MAX FREQ.

(MHz)

COUNT

PACKAGE FLASH (KB) SRAM (KB) FLEX.BUS DMA PLL or FLL FLEX TIMERS DAC

MKV31F512VLL12 120 100 LQFP 512 96 YES 16-ch. PLL 2 x 8-ch.; 2 x 2-ch. 2

MKV31F512VLH12 120 64 LQFP 512 96 YES 16-ch. PLL 2 x 8-ch.; 2 x 2-ch. 2

MKV31F512VLL12P 120 100 LQFP 512 96 YES 16-ch. PLL 2 x 8-ch.; 2 x 2-ch. 2

MKV31F256VLL12 120 100 LQFP 256 48 NO 16-ch. PLL 1 x 8-ch.; 2 x 2-ch. 1

MKV31F256VLH12 120 64 LQFP 256 48 NO 16-ch. PLL 1 x 8-ch.; 2 x 2-ch. 1

MKV31F256VLH12P 120 64 LQFP 256 48 NO 16-ch. PLL 1 x 8-ch.; 2 x 2-ch. 1

MKV31F128VLL10 100 100 LQFP 128 24 NO 4-ch. FLL 1 x 8-ch.; 2 x 2-ch. 1

MKV31F128VLH10 100 64 LQFP 128 24 NO 4-ch. FLL 1 x 8-ch.; 2 x 2-ch. 1

MKV31F128VLH10P 100 64 LQFP 128 24 NO 4-ch. FLL 1 x 8-ch.; 2 x 2-ch. 1

MKV30F128VLH10 100 64 LQFP 128 16 NO 4-ch. FLL 1 x 8-ch.; 2 x 2-ch. 1

MKV30F128VLF10 100 48 LQFP 128 16 NO 4-ch. FLL 1 x 8-ch.; 2 x 2-ch. 1

MKV30F128VFM10 100 32 QFN 128 16 NO 4-ch. FLL 1 x 8-ch.; 2 x 2-ch. 1

MKV30F128VLF10P 100 48 LQFP 128 16 NO 4-ch. FLL 1 x 8-ch.; 2 x 2-ch. 1

MKV30F64VLH10 100 64 LQFP 64 16 NO 4-ch. FLL 1 x 8-ch.; 2 x 2-ch. 1

MKV30F64VLF10 100 48 LQFP 64 16 NO 4-ch. FLL 1 x 8-ch.; 2 x 2-ch. 1

MKV30F64VFM10 100 32 QFN 64 16 NO 4-ch. FLL 1 x 8-ch.; 2 x 2-ch. 1

MKV30F64VLH10P* 100 64 LQFP 64 16 NO 4-ch. FLL 1 x 8-ch.; 2 x 2-ch. 1

MKV30F64VLF10P* 100 48 LQFP 64 1 NO 4-ch. FLL 1 x 8-ch.; 2 x 2-ch. 1

Document Number:

KV3XFS REV 5

www.nxp.com/Kinetis/VSeries

NXP, the NXP logo, Kinetis, Processor Expert and Tower are trademarks of NXP B.V. All other product or service names are the

property of their respective owners. ARM, Cortex and Keil are registered trademarks of ARM Limited (or its subsidiaries) in the EU

* package your way

P1-P3

FRDM-MC-LVMTR

Mfr. #:

Buy FRDM-MC-LVMTR

Manufacturer:

NXP / Freescale

Description:

Power Management IC Development Tools FRDM-MC-LVMTR, MOTOR 3-PH BLDC 4000r/min 24V 2.3A 990g.cm 40W, MFR. Linix, 45ZWN24-40

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

FRDM-MC-LVMTR

FRDM-MC-LVMTR

Products related to this Datasheet