OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

MAX410CSA-T

P1-P3P4-P6P7-P9P10-P12P13-P13
General Description
The MAX410/MAX412/MAX414 single/dual/quad op
amps set a new standard for noise performance in
high-speed, low-voltage systems. Input voltage-noise
density is guaranteed to be less than 2.4nV/√Hz at
1kHz. A unique design not only combines low noise
with ±5V operation, but also consumes 2.5mA supply
current per amplifier. Low-voltage operation is guaran-
teed with an output voltage swing of 7.3V
P-P
into 2kΩ
from ±5V supplies. The MAX410/MAX412/MAX414 also
operate from supply voltages between ±2.4V and ±5V
for greater supply flexibility.
Unity-gain stability, 28MHz bandwidth, and 4.5V/µs
slew rate ensure low-noise performance in a wide vari-
ety of wideband and measurement applications. The
MAX410/MAX412/MAX414 are available in DIP and SO
packages in the industry-standard single/dual/quad op
amp pin configurations. The single comes in an ultra-
small TDFN package (3mm 3mm).
Applications
Low-Noise Frequency Synthesizers
Infrared Detectors
High-Quality Audio Amplifiers
Ultra Low-Noise Instrumentation Amplifiers
Bridge Signal Conditioning
Features
o Voltage Noise: 2.4nV/√Hz (max) at 1kHz
o 2.5mA Supply Current Per Amplifier
o Low Supply Voltage Operation: ±2.4V to ±5V
o 28MHz Unity-Gain Bandwidth
o 4.5V/µs Slew Rate
o 250µV (max) Offset Voltage (MAX410/MAX412)
o 115dB (min) Voltage Gain
o Available in an Ultra-Small TDFN Package
MAX410/MAX412/MAX414
Single/Dual/Quad, 28MHz, Low-Noise,
Low-Voltage, Precision Op Amps
________________________________________________________________
Maxim Integrated Products
1
OUT
N.C.V-
1
2
8
7
NULL
V+IN-
IN+
NULL
DIP/SO/TDFN
TOP VIEW
3
4
6
5
IN2-
IN2+V-
1
2
8
7
V+
OUT2IN1-
IN1+
OUT1
DIP/SO
3
4
6
5
MAX412
MAX410
Pin Configurations
+IN
-IN
42.2kΩ**
1%
2
3
200Ω
1%
1
200Ω
1%
1kΩ*
6
5
7
OUT
42.2kΩ
1%
1/2 MAX412
1/2 MAX412
*TRIM FOR GAIN.
**TRIM FOR COMMON-MODE REJECTION.
LOW-NOISE INSTRUMENTATION AMPLIFIER
Typical Operating Circuit
19-4194; Rev 6; 9/09
Ordering Information
PART TEMP RANGE PIN-PACKAGE
MAX410CPA 0°C to +70°C 8 Plastic DIP
MAX410BCPA 0°C to +70°C 8 Plastic DIP
MAX410CSA 0°C to +70°C 8 SO
MAX410BCSA 0°C to +70°C 8 SO
MAX410EPA -40°C to +85°C 8 Plastic DIP
MAX410BEPA -40°C to +85°C 8 Plastic DIP
MAX410ESA -40°C to +85°C 8 SO
MAX410BESA -40°C to +85°C 8 SO
MAX410ETA -40°C to +85°C 8 TDFN-EP*
MAX410MSA/PR -55°C to +125°C 8 SO**
MAX410MSA/PR-T -55°C to +125°C 8 SO**
*
EP = Exposed pad. Top Mark—AGQ.
**
Contact factory for availability.
Ordering Information continued at end of data sheet.
Pin Configurations continued at end of data sheet.
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim's website at www.maxim-ic.com.
MAX410/MAX412/MAX414
Single/Dual/Quad, 28MHz, Low-Noise,
Low-Voltage, Precision Op Amps
2 _______________________________________________________________________________________
ABSOLUTE MAXIMUM RATINGS
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
Supply Voltage .......................................................................12V
Differential Input Current (Note 1) ....................................±20mA
Input Voltage Range........................................................V+ to V-
Common-Mode Input Voltage ..............(V+ + 0.3V) to (V- - 0.3V)
Short-Circuit Current Duration....................................Continuous
Continuous Power Dissipation (T
A
= +70°C)
MAX410/MAX412
8-Pin Plastic DIP (derate 9.09mW/°C above +70°C) ...727mW
8-Pin SO (derate 5.88mW/°C above +70°C)................471mW
8-Pin TDFN (derate 18.5mW/°C above +70°C) .........1482mW
MAX414
14-Pin Plastic DIP (derate 10.00mW/°C above +70°C)800mW
14-Pin SO (derate 8.33mW/°C above +70°C)..............667mW
Operating Temperature Ranges:
MAX41_C_ _ .......................................................0°C to +70°C
MAX41_E_ _.....................................................-40°C to +85°C
MAX41_M_ _..................................................-55°C to +125°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
ELECTRICAL CHARACTERISTICS
(V+ = 5V, V- = -5V, T
A
= +25°C, unless otherwise noted.)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
MAX410, MAX410B, MAX412, MAX412B ±120 ±250
Input Offset Voltage V
OS
MAX414, MAX414B ±150 ±320
µV
Input Bias Current I
B
±80 ±150 nA
Input Offset Current I
OS
±40 ±80 nA
Differential Input Resistance R
IN(Diff)
20 kΩ
Common-Mode Input Resistance R
IN
(
CM
)
40 MΩ
Input Capacitance C
IN
4pF
10Hz 7
MAX410, MAX412,
MAX414
1000Hz (Note 2) 1.5 2.4
Input Noise-Voltage Density e
n
MAX410B, MAX412B,
MAX414B
1000Hz (Note 2) 2.4 4.0
nV√Hz
f
O
= 10Hz 2.6
Input Noise-Current Density i
n
f
O
= 1000Hz 1.2
pA√Hz
Common-Mode Input Voltage V
CM
±3.5
+3.7/
-3.8
V
Common-Mode Rejection Ratio CMRR V
CM
= ±3.5V 115 130 dB
Power-Supply Rejection Ratio PSRR V
S
= ±2.4V to ±5.25V 96 103 dB
R
L
= 2kΩ, V
O
= ±3.6V 115 122
Large-Signal Gain A
VOL
R
L
= 600Ω, V
O
= ±3.5V 110 120
dB
Output Voltage Swing V
OUT
R
L
= 2kΩ
+3.6
-3.7
+3.7/
-3.8
V
Short-Circuit Output Current I
SC
35 mA
Slew Rate SR 10kΩ || 20pF load 4.5 V/µs
Unity-Gain Bandwidth GBW 10kΩ || 20pF load 28 MHz
Settling Time t
S
To 0.1% 1.3 µs
Channel Separation C
S
f
O
= 1kHz 135 dB
Note 1: The amplifier inputs are connected by internal back-to-back clamp diodes. In order to minimize noise in the input stage, current-
limiting resistors are not used. If differential input voltages exceeding ±1.0V are applied, limit input current to 20mA.
MAX410/MAX412/MAX414
Single/Dual/Quad, 28MHz, Low-Noise,
Low-Voltage, Precision Op Amps
_______________________________________________________________________________________ 3
ELECTRICAL CHARACTERISTICS
(V+ = 5V, V- = -5V, T
A
= 0°C to +70°C, unless otherwise noted.)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
Input Offset Voltage V
OS
±150 ±350 µV
Offset Voltage Tempco ∆V
OS
/∆T Over operating temperature range ±1 µV/°C
Input Bias Current I
B
±100 ±200 nA
Input Offset Current I
OS
±80 ±150 nA
Common-Mode Input Voltage V
CM
±3.5
+3.7/
-3.8
V
Common-Mode Rejection Ratio CMRR V
CM
= ±3.5V 105 121 dB
Power-Supply Rejection Ratio PSRR V
S
= ±2.4V to ±5.25V 90 97 dB
R
L
= 2kΩ, V
O
= ±3.6V 110 120
Large-Signal Gain A
VOL
R
L
= 600Ω, V
O
= ±3.5V 90 119
dB
Output Voltage Swing V
OUT
R
L
= 2kΩ ±3.5
+3.7/
-3.6
V
Supply Current I
S
Per amplifier 3.3 mA
ELECTRICAL CHARACTERISTICS
(V+ = 5V, V- = -5V, T
A
= -40°C to +85°C, unless otherwise noted.) (Note 3)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
MAX410, MAX410B, MAX412, MAX412B ±200 ±400
Input Offset Voltage V
OS
MAX414, MAX414B ±200 ±450
µV
Offset Voltage Tempco ∆V
OS
/∆T Over operating temperature range ±1 µV/°C
Input Bias Current I
B
±130 ±350 nA
Input Offset Current I
OS
±100 ±200 nA
Common-Mode Input Voltage V
CM
±3.5
+3.7/
-3.6
V
Common-Mode Rejection Ratio CMRR V
CM
= ±3.5V 105 120 dB
Power-Supply Rejection Ratio PSRR V
S
= ±2.4V to ±5.25V 90 94 dB
R
L
= 2kΩ, V
O
= ±3.6V 110 118
Large-Signal Gain A
VOL
R
L
= 600Ω, V
O
= +3.4V to -3.5V 90 114
dB
Output Voltage Swing V
OUT
R
L
= 2kΩ ±3.5
+3.7/
-3.6
V
Supply Current I
S
Per amplifier 3.3 mA
ELECTRICAL CHARACTERISTICS (continued)
(V+ = 5V, V- = -5V, T
A
= +25°C, unless otherwise noted.)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
Operating Supply-Voltage Range V
S
±2.4 ±5.25 V
Supply Current I
S
Per amplifier 2.5 2.7 mA
P1-P3P4-P6P7-P9P10-P12P13-P13

MAX410CSA-T

Mfr. #:
Buy MAX410CSA-T
Manufacturer:
Maxim Integrated
Description:
Operational Amplifiers - Op Amps Single 28MHz Low-V Low-Noise Precision
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet