TSOP382.., TSOP384..
www.vishay.com
Vishay Semiconductors
Rev. 1.5, 22-Jul-16
1
Document Number: 82491
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IR Receiver Modules for Remote Control Systems
MECHANICAL DATA
Pinning for TSOP382.., TSOP384..:
1 = OUT, 2 = GND, 3 = V
S
FEATURES
• Very low supply current
• Photo detector and preamplifier in one package
• Internal filter for PCM frequency
• Supply voltage: 2.5 V to 5.5 V
• Improved immunity against ambient light
• Insensitive to supply voltage ripple and noise
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
DESCRIPTION
These products are miniaturized IR receiver modules for
infrared remote control systems. A PIN diode and a
preamplifier are assembled on a leadframe, the epoxy
package contains an IR filter.
The demodulated output signal can be directly connected to
a microprocessor for decoding.
The TSOP384.. series devices are optimized to suppress
almost all spurious pulses from energy saving lamps like
CFLs. The AGC4 used in the TSOP384.. may suppress
some data signals. The TSOP382.. series are provided
primarily for compatibility with old AGC2 designs. New
designs should prefer the TSOP384.. series containing the
newer AGC4.
These components have not been qualified according to
automotive specifications.
19026
PARTS TABLE
AGC
LEGACY, FOR LONG BURST REMOTE
CONTROLS (AGC2)
RECOMMENDED FOR LONG
BURST CODES (AGC4)
Carrier frequency
30 kHz TSOP38230 TSOP38430
33 kHz TSOP38233 TSOP38433
36 kHz TSOP38236 TSOP38436
(1)(2)(3)
38 kHz TSOP38238 TSOP38438
(4)(5)
40 kHz TSOP38240 TSOP38440
56 kHz TSOP38256 TSOP38456
(6)(7)
Package Minicast
Pinning 1 = OUT, 2 = GND, 3 = V
S
Dimensions (mm) 5.0 W x 6.95 H x 4.8 D
Mounting Leaded
Application Remote control
Best remote control code
(1)
RC-5
(2)
RC-6
(3)
Panasonic
(4)
NEC
(5)
Sharp
(6)
r-step
(7)
Thomson RCA