S5U13522C300G00

X93A-C-001-01 Revision 1.3 1
GRAPHICS
S1D13522
S1D13522 EPD Controller February 21 2013
EPSON's S1D13522 controller builds on the success of the S1D13521 providing high performance, low system
cost solutions for E Ink EPDs (Electronic Paper Displays).
The S1D13522 includes 2M bytes of stacked memory and features that greatly reduce the CPU overhead for
EPD applications. Allowing multi-regional and concurrent display updates, the S1D13522 adds interface support
for direct Touch/Pen drawing. Picture-in-Picture, Rotation, Transparency, and Hardware Cursor functions further
increase the flexibility in delivering the optimal display experience.
The Advanced Sequencer Engine, Power Management, I2C Thermal Sensor, and optional Serial Flash Memory
support make a variety of implementations possible. The S1D13522 is the ideal choice for new EPD designs and
design upgrades.
Features
Targeted for display resolutions up to 1200x825
Smooth screen updates
Multi-Regional updates for smooth drawing
Rotation support for Host Writes
Low Host overhead
16-bit Indirect or Serial Host Support
I
2
C Thermal Sensor provides temperature support
for automatic temperature compensation.
Optional Serial Flash Memory with auto boot
display support and customizable boot screen
Programmable Power Management for panel power
saving
2M bytes of stacked memory
SPI master supporting 2 slave devices
Advanced Sequencer Engine w/ ALU
Picture-in-Picture and Cursor functions with
separate buffers
Supports Direct Touch/Pen drawing
Internal Programmable PLL
Single MHz Clock Input
Software Power Save Mode
General Purpose IO Pins available
Package: PFBGA (0.8mm and 0.5mm ball pitch)
System Block Diagram
Description
Driver Interface
HOST
S1D13522
Power
Management
Optional
Serial Flash
LM75 or Generic
Device for
Temperature
Reading
16-bit or Serial Host
SPI
I2C
Panel ID Read
(SPI or I2C
Pen/Touch
Digitizer ICs
n/a
X93A-C-001-01 Revision 1.3 2
GRAPHICS
S1D13522
Display Support
Compatible with E Ink Active Matrix Panels
Compatible with LG Display Gate In Panel (GIP)
Up to 1200x825 @ 50Hz
Up to 4-bit grayscale waveforms (16 grey-shades)
Auto Waveform Management Version 2
Panel Border Support
Waveform format: E Ink’s
Stacked Memory
2M bytes of Stacked memory
Host write rotation: 90°, 180°, or 270°
Host writes can use packed mode for high-speed
transfers
Host writes with transparency for non-rectangular
images
New image data can be loaded to the image buffer
while display updates are in progress
Host Support
Indirect Intel 80 16-bit or Serial Host
Simplified command style access
DMA compatible memory bus style host interface
Advanced Sequencer Engine w/ALU performs
pre-programmed series of commands from Host
Display Features
Picture-in-Picture (PIP) window with separate
image buffer and transparency function
Hardware Cursor support
Serial Flash Memory Waveform Read Support
Optional SPI Flash memory for auto boot display
support and customizable boot screen
High Speed SPI Mode
Power Management Support
4-pin power sequencing control with auto power
on/off for update operations
I
2
C Thermal Sensor Temperature Reading Support
Supports LM75 digital temperature sensor and
compatible devices
Generic I2C device support
Clock Source
Internal Programmable PLL
Single MHz clock input (CLKI/Crystal)
Miscellaneous
SPI master supporting 2 slave devices (i.e. Serial
Flash, Panel ID retrieval, etc.)
Supports Pen/Touch Digitizer ICs (SPI or UART)
Software Power Save Modes
Low and ultra-low power modes
General Purpose Input/Output pins
Each GPIO pin can be configured for edge detect
interrupt
Package:
PFBGA 144-pin (10mm x 10mm, 0.8mm pitch)
PFBGA 144-pin (7mm x 7mm, 0.5mm pitch)
Core Voltage: 1.8V
IO Voltage: 1.65V ~ 3.6V
For technical and ordering information for the E Ink AM350 Broadsheet Prototype Kit, contact E Ink at
www.eink.com/kits/.
For technical and ordering information for the S1D13522 EPD Controller, contact your EPSON sales
representative.
Japan
Seiko Epson Corporation
IC International Sales Group
421-8, Hino, Hino-shi
Tokyo 191-8501, Japan
Tel: +81-42-587-5814
Fax: +81-42-587-5117
North America
Epson Electronics America, Inc.
2580 Orchard Parkway
San Jose, CA 95131, USA
Tel: +1-800-228-3964
Fax: +1-408-922-0238
Taiwan
Epson Taiwan Technology & Trading Ltd.
14F, No. 7
Song Ren Road
Taipei 110, Taiwan
Tel: +886-2-8786-6688
Fax: +886-2-8786-6660
Hong Kong
Epson Hong Kong Ltd.
20/F, Harbour Centre
25 Harbour Road
Wanchai, Hong Kong
Tel: +852-2585-4600
Fax: +852-2827-4346
Europe
Epson Europe Electronics GmbH
Riesstrasse 15
80992 Munich, Germany
Tel: +49-89-14005-0
Fax: +49-89-14005-110
Singapore
Epson Singapore Pte., Ltd.
1 HarbourFront Place
#03-02 HarbourFront Tower One
Singapore 098633
Tel: +65-6586-5500
Fax: +65-6271-3182
© SEIKO EPSON CORPORATION 2009-2013. All rights reserved.
Information in this document is subject to change without notice. You may download and use this document, but only for your own use in evaluating Seiko Epson/EPSON products. You may
not modify the document. Epson Research and Development, Inc. disclaims any representation that the contents of this document are accurate or current. The Programs/Technologies
described in this document may contain material protected under U.S. and/or International Patent laws.
EPSON is a registered trademark of Seiko Epson Corporation. All other trademarks are the property of their respective owners.
Epson semiconductor website http://www.epson.jp/device/semicon_e/
China
Epson (China) Co., Ltd.
7F, Jinbao Bldg.
No. 89 Jinbao St.
Dongcheng District
Beijing 100005, China
Tel: +86-10-6410-6555
Fax: +86-10-6410-7320
Korea
Seiko Epson Corp.
Korea Office
50F, LKI 63 Bldg.
60 Yoido-dong, Youngdeungpo-Ku,
Seoul, 150-763, Korea
Tel: +82-2-784-6027
Fax: +82-2-767-3677
n/a

S5U13522C300G00

Mfr. #:
Manufacturer:
Epson ICs
Description:
Display Development Tools Eval Board for S1D13522
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet