All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm).
All specifications are to the latest revisions. Specifications are subject to change without notice.
Registered trademarks are the property of their respective companies.
DIP Clips® for 8-14-16-20
Pin Clips
USA: Sales: 800-490-2361 Fax: 425-446-5844 Technical Support: technicalsupport@pomonatest.com
Europe: 31-(0) 40 2675 150 International: 425-446-5500 Where to Buy: www.pomonaelectronics.com
Rev: 100
D1094200
Page 1 of 1
Pomona DIP Clip® test clips are designed for testing dual-in-line IC packages on PC boards. These devices incorporate
many built-in features that assure a positive electrical connection as well as hands free testing.
• Contacts (.040" wide on lower end) are serrated for the best electrical contact.
• .025" X .028" serrated test points on upper end will accept wire wraps or mini test clips.
• Molded barriers between contacts allows live board connections without accidental shorting of contacts.
• Can also be used as an insertion tool for DIPs.
• Contacts are spring tempered Nickel Silver or Gold Plated Beryllium Copper alloy. Oxide penetrating clips have a
roughened stainless steel surface treatment.
• Open back option allows probing on the chip leads while clip is attached.
Pomona's DIP Clip® test clips are perfect for emulation, field service, failure analysis, and for use with logic analyzers.
Model# Size Pins Clip Width Type
Contact Material and
Plating
5108 8 0.43in (10.9mm) Standard DIP Clip® Be-Cu, Gold Plate
5208 8 0.43in (10.9mm) Open Back DIP Clip® Be-Cu, Gold Plate
5014 14 0.72in (18.3mm) Standard DIP Clip® Nickel Silver
5114 14 0.72in (18.3mm) Open Back DIP Clip® Nickel Silver
3916A 16 0.83in (21.1mm) Standard DIP Clip® Nickel Silver
5220 20 1.03in (26.2mm) Open Back DIP Clip® Be-Cu, Gold Plate
