Insertion Force
16oz (4.45N) maximum per contact pair when tested with .070" (1.78mm) thick gauge
Re-Insertability in same Hole
Withdrawal Force
Contact insertion into Hole
Contact Retention in Hole
1oz (0.28N) minimum per contact pair when tested with .054" (1.37mm) thick gauge
Dielectric Withstand Voltage
1200VAC rms at sea level between adjacent contacts
Insulation Resistance
Operating Temperature
Insulator Material
Contact Material
Contact Plating
UL 94V-0 Thermoplastic Polyester, Black
30u" Gold Plating on mating area and Tin Plating on tails with Nickel underplating all over
Current Rating
Contact Resistance
www.edac.net
737 SERIES
Card Edge Connector 0.156" (3.96mm) Pitch
Total Number of Contacts: Contact Rows
005, 006, . . . . 043 Single Row
010, 012, . . . . 086 Dual Row
737-044-520-206
Series
EXAMPLE PART NUMBER:
Contact Rows
Contact Code
Total Number of Contacts
Contact Code Description & Contact Point Tail length "G"
520 P.C. Tail Regular Point .190 (4.83)
522 P.C. Tail Regular Point .375 (9.53)
525 P.C. Tail High Point .190 (4.83)
540 Wire Wrap Regular Point .560 (14.22)
541 Wire Wrap Regular Point .750 (19.05)
545 Wire Wrap High Point .560 (14.22)
560 Make Before Break (MBB) Contacts .190 (4.83)
Series: 737
Contact Rows: Description
106 Single Row
206 Dual Row
Ordering Code Notes:
1) All connector sizes up to 43 contacts single row / 86 contacts
dual row are available upon request.
2) Make-Before-Break switching contacts, assembled in specific
contact positions, are available upon request.
P/N 306-240-318
BETWEEN CONTACT
POLARIZING KEY
P/N 745-240-328
IN-CONTACT
POLARIZING KEY
FEATURES:
• UL Recognized
• .156" (3.96mm) Contact spacing x .200" (5.08mm) row spacing
• Accepts .062" (1.57mm) nominal thickness P.C. board
• High profile insulator body, .645"(16.38mm) with edge notch
Option
• Contact termination options include P.C. tail, and .025"
(0.64mm) square wire wrap
• Press-Fit compliant section for gas tight reliable connection in
plated through holes eliminates soldering operations
• Single or dual row configurations
• Accepts between contact and In-Contact polarizing keys
(Special features if requested)
• Tools available for insulator and contact removal. Simple "Flat
Rock" tooling is used for connector installation.
• RoHS Compliant
