Reference only
ETP1DB02
18 / 19
Straight taping type < Lead code : DB >
Pitch of component 12.7mm / Lead spacing 2.5mm
Unit : mm
Item Code Dimensions Remarks
Pitch of component
P 12.7+/-1.0
Pitch of sprocket hole
P0 12.7+/-0.2
Lead spacing
F 2.5+0.4/-0.2
Length from hole center to component center
P2 6.35+/-1.3
Deviation of progress direction
Length from hole center to lead
P1 5.1+/-0.7
Deviation along tape, left or right defect
S 0+/-2.0
They include deviation by lead bend .
Carrier tape width
W 18.0+/-0.5
Position of sprocket hole
W1 9.0+0/-0.5
Deviation of tape width direction
Lead distance between reference and bottom
plane
H 16.0+/-0.5
Protrusion length
0.5 max.
Diameter of sprocket hole
D0 4.0+/-0.1
Lead diameter
d 0.50+/-0.05
Total tape thickness
t1 0.6+/-0.3
They include hold down tape thickness.
Total thickness of tape and lead wire
t2 1.5 max.
Deviation across tape
h1
1.0 max.
h2
Portion to cut in case of defect
L 11.0+0/-1.0
Hold down tape width
W0 9.5 min.
Hold down tape position
W2 1.5+/-1.5
Coating extension on lead
e 1.5 max.
P2 P
P1
P0
L
D0
H
W0
W1
W
0
h1
h2
S
t1
t2
Marking
W2
F
e
d