H8200RBYA Datasheet H863K4BZA, H8562RBCA, H420RBDA | P1-P3

General Data

Lead Material: Solderability to BS CECC 40101 004 Para 4.15.1

Encapsulation: Conformal Epoxy Coating

Resistor Marking: Legend printed in accordance with CECC 40000 Para 2.4

Solvent Resistance: The epoxy coating and print will withstand the action of all commonly

used industrial cleansing solvents

Characteristics - Electrical

H4P H4 H8

BS CECC 40101 004

Style:

KHJ

Power Rating at 70°C:

0.25W 0.063W 0.125W

Temperature Rise (max):

32°C 14°C 28°C

Limiting Element Voltage:

250V 200V 200V

BS CECC 40101 030

Style:

Power Rating at 125°C:

0.125W 0.1W

Temperature Rise (max):

30°C 30°C

Limiting Element Voltage:

250V 200V

BS CECC 40101 804

Style:

Power Rating at 125°C:

0.25W 0.125W

Limiting Element Voltage:

250V 200V

Commercial Ratings

Power Rating at 70°C:

1.0W 0.5W 0.25W

Temperature Rise:

70°C 55°C 40°C

Limiting Element Voltage:

500V 350V 350V

Axial Leaded Precision Resistors

Type HOLCO Series

1773230 CIS BI 06/2011 Dimensions are in millimeters Dimensions are shown for For email, phone or live chat, go to: te.com/help

and inches unless otherwise reference purposes only.

specified. Values in brackets Specifications subject

are standard equivalents. to change.

Key Features

I Ultra Precision -

Down To 0.05%

I Matched Sets Available

To 2ppm/°C

I High Pulse Withstand

I Low Reactance

I Low TCR - Down

To 5ppm/°C

I Long Term Stability

I Up To 1 Watt At 70°C

I Released To CECC 40101

004, 030 And 804

The Holco range of Precision Metal Film Resistors meets the requirement for economically

priced components for industrial and military applications. The manufacturing facility

utilises closely controlled production processes including the sputter coating of metal alloy

films to ceramic substrates, and laser spiralling to achieve close tolerance and high

stability resistors. An epoxy coating is applied for environmental and mechanical

protection. Commercially the Series is available in two case sizes, from 1 ohm to

4M ohms, tolerances from 0.05% to 1% and TCR's from 5ppm/°C to 100ppm/°C. Offered

with release to BS CECC 40101 004, 030 and 804 the H8 is available via distribution.

Characteristics - Electrical

Typical Data Reference

Voltage Coefficient of Less Than n/a

Resistance (Between 10% 5ppm/Volt Applied

and Full Rated Voltage)

Insulation Resistance at Greater Than 10

Ohms n/a

500 Volts

Resistance to Soldering Less Than 0.05% BS CECC 40101 004

Heat (260°C for 10 Secs.) Para 4.15.2

Short Term Overload Less Than 0.06% BS CECC 40101 004

(6.25 Times Rated BS CECC Para 4.11

Wattage for 5 Seconds)

Ambient Temperature -55°C to +155°C BS CECC 40101 004,

Range BS CECC 40101 030 & Commercial

Rapid Change of Less Than 0.04% BS CECC 40101 004

Temperature Para 4.16

(-55°C to +155°C, 5 cycles)

Shelf Life Less Than 0.05% Per Annum n/a

(at Normal Room Temp.)

Vibration Less Than 0.04% BS CECC 40101 004

(10-500 HZ,Amplitude Para 4.19

0.75mm, or Acceleration

98m/s2 which is less severe,

sweep duration 6 hours)

Vibration Less Than 0.04% MIL STD 202

(55-2000 Hz Simple METHOD 204-C

Harmonic Motion,

Max.Acceleration 98m/s2,

Duration 35±5 Minutes)

Bump (390m/s2, Less Than 0.03% BS 2011 Part 2.1 Eb 1977 (1984)

4000 Bumps)

Load Stability See Graphs n/a

Damp Heat Steady State See Graph BS CECC 40101 004

Para 4.21

Axial Leaded Precision Resistors

Type HOLCO Series

1773230 CIS BI 06/2011 Dimensions are in millimeters Dimensions are shown for For email, phone or live chat, go to: te.com/help

and inches unless otherwise reference purposes only.

specified. Values in brackets Specifications subject

are standard equivalents. to change.

Temperature Coefficient / Tolerance Ranges

TCR H4P H4 H8

ppm/°C

0.05% 0.1%-0.25% 0.5%-1.0% 0.05% 0.1%-0.25% 0.5%-1.0% 0.05% 0.1%-0.25% 0.5%-1.0%

5 10R-500K 10R-500K 10R-500K 10R-500K 10R-500K 10R-500K 10R-500K 10R-500K 10R-500K

10 10R-1M0 10R-1M0 10R-1M0 10R-1M0 10R-1M0 10R-1M0 10R-1M0 10R-1M0 10R-1M0

15 10R-1M0 10R-1M0 10R-1M0 10R-1M0 10R-1M0 10R-1M0 10R-1M0 10R-1M0 10R-1M0

25 10R-1M0 10R-2M0 10R-2M0 10R-1M0 10R-2M0 10R-2M0 10R-1M0 10R-2M0 10R-2M0

50 10R-1M0 10R-2M0 10R-4M0 10R-1M0 10R-2M0 10R-4M0 10R-1M0 10R-2M0 10R-4M0

100 10R-1M0 1R0-2M0 1R0-4M0 10R-1M0 1R0-2M0 1R0-4M0 10R-1M0 1R0-2M0 1R0-4M0

Approved Value Ranges

40101-004, 40101-030

Type

Style Style Z C D Y

004 030 100ppm 50ppm 25ppm 15ppm

H4 K J 10R-1M0 49R9-1M0 49R9-1M0 49R9-1M0

H8 HJ H 10R-1M0 49R9-1M0 49R9-1M0 49R9-1M0

Tolerances 0.1%, 0.25%, 0.5%, 1%

40101-804

Type Style

CDT

50ppm 25ppm 15ppm

H4 B 49R9-1M0 49R9-1M0 49R9-1M0

H8 A 49R9-1M0 49R9-1M0 49R9-1M0

Tolerances 0.1%, 0.25%, 0.5%, 1%

Axial Leaded Precision Resistors

Type HOLCO Series

1773230 CIS BI 06/2011 Dimensions are in millimeters Dimensions are shown for For email, phone or live chat, go to: te.com/help

and inches unless otherwise reference purposes only.

specified. Values in brackets Specifications subject

are standard equivalents. to change.

Dimensions

H4P H4 H8

Body Length (L) maximum: 10.0 mm 10.0 mm 7.20 mm

Body Diameter (D) maximum: 3.70 mm 3.70 mm 2.50 mm

Lead Diameter (d) maximum: 0.60 mm 0.60 mm 0.60 mm

Lead Length (l) nominal: 30.0 mm 30.0 mm 30.0 mm

Recommended Mounting Pitch: 12.7 mm 12.7 mm 10.2 mm

Weight (g/100 resistors) 40 40 24

To prevent damage to the components conformal coating, the leads should be adequately supported during the

forming process

Characteristics -

Long Term Stability

Commercial

Ratings at 125°C

H4P - 1W

H4 - 0.5 W

H8 - 0.25 W

Damp Heat Steady State

93% RH at 40°C

Long Term Stability

BS CECC 40101 004

Ratings at 70°C

H4 - 0.25 W

H8 - 0.125 W

Long Term Stability

BS CECC 40101 030

Ratings at 125°C

H4 - 0.125 W

H8 - 0.1 W

P1-P3 P4-P4

H8200RBYA

Mfr. #:

Buy H8200RBYA

Manufacturer:

Description:

Metal Film Resistors - Through Hole H8 200R 0.1% 15PPM

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

H8200RBYA

H8200RBYA

Products related to this Datasheet