TW125B Low Current / Low Voltage 1.1 to 1.7 GHz
27dB gain In-line Amplifier
Specifications
Vcc =3.3V, over full bandwidth, T=25 °C
Electrical
• Nominal Gain 27 dB +.1/-.2 dB typ.
• Pass Band Ripple +/-0.5 dB
• Impedance 50 Ohms
• Noise Figure 2 dB typ.
• Bandwidth 1.1 to 1.7 GHz
• Input VSWR 1.3:1 typ..
• Output VSWR 1.3:1 typ.
• Reverse Isolation >35 dB
• Output P1dB +9dB min
• Group Delay (w/o cable) <1ns
• Output IP3 +14dBm
• Supply Range voltage 3 to 16 VDC Nominal, 12 VDC recommended operating max
• Supply Current 11 mA typ.
Mechanicals & Environmental
• Mechanical Size (body dimensions only) 2.32” L x 0.787” Dia. (59 mm L x 20 mm dia.)
• Connectors SMA Jack, TNC Jack, or N-Type Jack
Torque Limitations (in. lbs) N-type TNC SMA
6.5 – 8 9 - 11 3.6 – 4.5
• Operating Temp. Range -40 to +85 °C
• Enclosure Nickel-plated brass
• Environmental RoHS, REACH, and IP67 compliant
• Warranty One year – parts and labour
Ordering Information
• TW125B - 27dB gain In-Line Amp with SMA female on both ends 32-0125B-00
• TW125B - 27dB gain In-Line Amp with TNC female on both ends 32-0125B-01
• TW125B - 27dB gain In-Line Amp with SMA female on antenna side and TNC on output side 32-0125B-02
• TW125B - 27dB gain In-Line Amp with TNC female on antenna side / SMA female on output side 32-0125B-03
• TW125B - 27dB gain In-Line Amp with N-Type female on both ends 32-0125B-14 (premium applies)
36 Steacie Drive, Ottawa ON K2K 2A9 Canada
Tel +1 613 591 3131 Fax 613 591 3121 sales@tallysman.com
The information provided herein is intended as a guide only and is subject to change without notice. This document is not to be regarded as a guarantee of
performance. Tallysman Wireless Inc. hereby disclaims any or all warranties and liabilities of any kind. © 2015 Tallysman Wireless Inc. All rights reserved.
Rev 1.9
