- DCN 40314 01/14 STW
SVK JACK TO PLUG
DC-32.0 GHz
ATTENUATOR
CHECKED:
APPROVED:
DRAWN:
STW 12/10/13
STW 12/10/13
JMC 12/09/13
ROHS COMPLIANT
DISENGAGEMENT: 2 IN-LBS
MATERIAL:
BODIES, INSERTS, &
COUPLING NUT: STAINLESS STEEL PER AMS-5640,
ALLOY UNS S30300, TYPE 1
LOCK RING &
CONTACTS: BERYLLIUM COPPER PER ASTM B196,
ALLOY No. UNS C17300, TD04
SLEEVE: BRASS PER ASTM B16, ALLOY UNS No. C36000
BEADS: POLYETHERMIDE PER ASTM D5205 "ULTEM 1000"
BELLOWS SPRINGS: ELECTRO-DEPOSITED GOLD OVER NICKEL
GASKET: SILICONE RUBBER PER A-A-59588,
CLASS 2B, GRADE 50/60
RESISTOR ELEMENT: ALUMINUM NITRIDE SUBSTRATE WITH
TANTALUM NITRIDE RESISTOR:
GOLD PLATED TERMINATIONS
FINISH:
BODIES, INSERTS, &
COUPLING NUT: PASSIVATED PER AMS-2700
CONTACTS: GOLD PER ASTM B488, TYPE I, CODE C, CLASS 1.27,
OVER NICKEL PER AMS-QQ-N-290, CLASS 1, .00005" MIN.
SLEEVE: GOLD PER ASTM B 488, TYPE II,CODE C, CLASS 1.27,
OVER NICKEL PER AMS-QQ-N-290, CLASS 1, .00005" MIN.
PERFORMANCE:
IMPEDANCE: 50 OHMS
FREQ. RANGE: DC TO 32.0 GHz
VSWR: 1.25:1 MAX. DC TO 18 GHz
1.30:1 MAX 18 TO 26.5 GHz
1.35:1 MAX 26.5 TO 32 GHz
OPERATING TEMP.: -55 C TO +125 C
AVG. POWER: 2.0 WATT (POWER INPUT DERATED LINEARLY
FROM 25 C TO 0.5 WATTS AT 125 C)
PEAK POWER: 500 WATTS (PEAK POWER FOR A DUTY CYCLE
OF 5X10-4 MAXIMUM PULSE DURATION OF
5 MICROSECONDS)
ENGAGEMENT/
PRODUCT DATA DRAWING
THIRD ANGLE PROJECTION
APPROVEDDATE
REVISION HISTORY
DESCRIPTION
REV
SIZE
SEE NOTES
SV Microwave, Inc.
SCALE: 4:1
SURFACE AREA:
DWG. NO.
B
MATERIAL:
FINISH:
PER ASME Y14.5M - 1994
3) BREAK CORNERS & EDGES .005 R. MAX.
7) REMOVE ALL BURRS
UNLESS OTHERWISE SPECIFIED
M3933/30-XX
95077
CAGE CODE
WITHIN .005 T.I.R.
West Palm Beach, FL 33409
TITLE:
PROPRIETARY
2400 Centrepark West Drive, Suite 100
6) DIA.’S ON COMMON CENTERS TO BE CONCENTRIC
MIL-STD-10.
SV MICROWAVE, INC IS PROHIBITED.
SEE NOTES
SHEET 1 OF 2
WITHOUT THE WRITTEN PERMISSION OF
5) SURFACE ROUGHNESS 63
ANY REPRODUCTION IN PART OR AS A WHOLE
1) ALL DIMENSIONS ARE IN INCHES [MILLIMETERS]
IS THE SOLE PROPERTY OF SV MICROWAVE, INC.
2) ALL DIMENSIONS ARE AFTER PLATING.
THE INFORMATION CONTAINED IN THIS DRAWING
4) CHAM. 1ST & LAST THREADS.
e
DIMENSIONS ARE IN INCHES TOLERANCES:
FRACTIONAL: 1/64 ANGULAR: X 1 0'
X X' 15'
DECIMAL: .X
.030
.XX
.010
.XXX
.005
INTERPRET DIMENSIONS AND TOLERANCES
N/A
1/4-36 UNS-2A
1.140±.020 28.96±0.51
.250 6.35
ACROSS
FLATS
.312 7.92
HEX.
