Data subject to change without notice.
Audio Broadcast Quality
560 Series
Features
Rugged black epoxy potted case with 9 pin connections (.025" square by
0.5" long).
Frequency response minimum @ 0 dbm +/- 1 db max. (+/- 0.5 db is typical)
of 30 Hz. to 30 Khz., except 560Q which is 30 Hz. to 15 Khz. - see data
sheets below for more detail.
Higher signal levels possible with reduced low frequency performance.
Insertion loss of 1 db maximum
Electrostatic shield between primary & secondary connected to core and
brought out to pin "SH".
Humbucking construction
Balanced split windings on pri. & sec. for circuit versatility.
Primaries and secondaries can be reversed for impedance matching.
Overall dimensions 1.64" (41.7 mm) x 1.33" (33.8 mm) x 0.85" (21.6 mm)
high max.
Shipping weight 4 oz. (0.1 kg)
Gallery
Part No. Application
Nominal Impedance (Ohms) Overall Dimensions
Primary Secondary A B C D E F G H
560C Emitter or mic to Line 12/48 150/600 1.33 1.64 0.85 0.20 1.30 0.14 0.36 0.17
560E Emitter or mic to Line 50/200 150/600 1.33 1.64 0.85 0.20 1.30 0.14 0.36 0.17
560G Isolating or Hybrid 150/600 150/600 1.33 1.64 0.85 0.20 1.30 0.14 0.36 0.17
560J Collector to Line or Line to Base 150/600 1200/4800 1.33 1.64 0.85 0.20 1.30 0.14 0.36 0.17
560L Collector to Line or Matching 150/600 5K/20K 1.33 1.64 0.85 0.20 1.30 0.14 0.36 0.17
560N Collector to Line 150/600 10K/40K 1.33 1.64 0.85 0.20 1.30 0.14 0.36 0.17
560Q Matching or Bridging 10k/40k 10K/40K 1.33 1.64 0.85 0.20 1.30 0.14 0.36 0.17
