610D106F200DL5

610D
www.vishay.com
Vishay Sprague
Revison: 20-Jul-16
1
Document Number: 42048
For technical questions, contact: aluminumcaps4@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Aluminum Capacitors
+125 °C, Non-Polar, Miniature
FEATURES
Extended temperature range
Exceptional capacitance stability
•Low DF
Low DC leakage current
Tantalum foil replacement
Axial lead
Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
(1)
Style 2. For style 5, increase the maximum length by 0.125" [3.18 mm].
QUICK REFERENCE DATA
DESCRIPTION VALUE
Nominal case size
Ø D x L in inches [mm]
0.296 x 1.000 [7.518 x 25.40]
to 0.390 x 2.812 [9.906 x 71.425]
Operating temperature -55 °C to +125 °C
Rated capacitance
range, C
R
0.68 μF to 680 μF
Tolerance on C
R
-10 %, +50 %; -10 %, +75 %
Rated voltage range,
U
R
7 WV
DC
to 250 WV
DC
Termination Axial leads
Life validation test
2000 h at +125 °C
CAP < 15 % from initial measurement
ESR < 1.3 x initial specified limit
DCL < initial specified limit
Shelf life
500 h at +125 °C
CAP < 10 % from initial measurement
ESR < 1.2 x initial specified limit
DCL < 2.0 x initial specified limit
RIPPLE CURRENT MULTIPLIERS
TEMPERATURE
AMBIENT TEMPERATURE MULTIPLIERS
+100 °C 1.5
+85 °C 2.0
+65 °C 2.5
FREQUENCY (Hz)
WV
DC
50 TO 60 100 TO 120 300 TO 400 > 100K
6 to 60 0.85 1.0 1.10 1.15
61 to 250 0.83 1.0 1.15 1.20
LOW TEMPERATURE PERFORMANCE
CAPACITANCE: The maximum allowable capacitance change
with temperature from +25 °C shall be in accordance with the
following:
RATED VOLTAGE
AT +125 °C
PERCENT CAPACITANCE
CHANGE AT
-55 °C +85 °C +125 °C
5 to 15 -30 +15 +20
20 and up -25 +15 +20
Available
DIMENSIONS in inches [millimeters]
CASE CODE
WITH OUTER INSULATION
DIAMETER LENGTH
(1)
(max.) TYPICAL WEIGHT (g)
KD 0.297 ± 0.031 [7.54 ± 0.79] 1.000 [25.40] 1.90
DE 0.390 ± 0.031 [9.92 ± 0.79] 1.187 [30.16] 3.90
DU 0.390 ± 0.031 [9.92 ± 0.79] 1.500 [38.10] 4.90
DL 0.390 ± 0.031 [9.92 ± 0.79] 2.187 [55.56] 7.00
DR 0.390 ± 0.031 [9.92 ± 0.79] 2.812 [71.42] 8.60
610D
www.vishay.com
Vishay Sprague
Revison: 20-Jul-16
2
Document Number: 42048
For technical questions, contact: aluminumcaps4@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
For lead (Pb)-free / RoHS compliant products add suffix “E3” to part number.
Example: 610D105F200KD2E3
Statements about product lifetime are based on calculations and internal testing. They should only be interpreted as estimations. Also due to external factors, the
lifetime in the field application may deviate from the calculated lifetime. In general, nothing stated herein shall be construed as a guarantee of durability.
DIMENSIONS AND AVAILABLE FORMS
PART NUMBER INFORMATION
610D 476 F 007 KD 2
TYPE CAPACITANCE CAPACITANCE
TOLERANCE
DC VOLTAGE
RATING
CASE
CODE
CASE STYLE
Identifies
the series
name.
Expressed in pF. The
first two digits are
significant figures.
The third is the
number of zeros.
F = -10 % / +50 %
G = -10 % / +75 %
Expressed in volts.
Zeros are used to
precede the voltage
rating (i.e. 007 = 7 V).
See table
Dimensions
2 = polyester sleeve (std.)
5 = polyester sleeve with
resin end seal (required
for exposure to halogenated
cleaning solvents)
Style 2
D
Polyester Sleeve
Vent
L
50.8 ± 3.175
(2.0 ± 0.125)
50.8 ± 3.175
(2.0 ± 0.125)
Style 5
D
Epoxy
Rigid Polyester Sleeve
Vent
L
50.8 ± 3.175
(2.0 ± 0.125)
Lead diameter
No. 20 AWG (0.032" [0.813 mm] Dia.)
50.8 ± 3.175
(2.0 ± 0.125)
0.76 (0.03) Typ.
Legal Disclaimer Notice
www.vishay.com
Vishay
Revision: 08-Feb-17
1
Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED

610D106F200DL5

Mfr. #:
Manufacturer:
Vishay
Description:
Aluminum Electrolytic Capacitors - Axial Leaded 10uF 200V 9.53x53.97 125 C Axi
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union