Type 4X Stainless Steel Two Door Floormount Enclosure
1422 N4
SS Series
Continuous Hinge Door with Clamps
Application
Designed to house electrical, electronic, hydraulic or pneumatic controls
and instruments.
Provides protection where equipment may be hosed down or otherwise be
very wet, or in specific applications where corrosion is a serious problem.
Standards
UL 508 Type 3R, 4, 4X, and 12
CSA Type 3R, 4, 4X, and 12
Complies with
NEMA Type 3R, 4, 4X, 12 and 13
JIC EGP-1-1967
IEC 60529, IP66
Construction
Formed 12 gauge 304 or 316 stainless steel.
Smooth, continuously welded seams without knockouts, cutouts or holes.
Body stiffeners are provided in the larger enclosures for extra rigidity.
Heavy duty stainless steel lifting eyebolts are provided with reinforcing
support angles.
Center post is removable for easy installation of the inner panel.
Formed lip on door and top of enclosure opening exclude flowing liquids
and contaminants.
Continuously hinged doors may be removed by pulling the stainless steel
hinge pin.
Doors are secured with heavy duty stainless steel clamps.
Provision for padlocking.
12" floor stands are welded to the enclosure.
Seamless poured-in place gasket.
Panel supports are provided for easy panel installation.
Collar studs are provided for mounting inner panels.
A bonding stud is provided on the door and a grounding stud is provided in
the enclosure for each door.
A literature pocket is provided.
Finish
Cover and enclosure are natural stainless steel with a smooth brushed
finish.
Removable inner panel is finished in white powder coating.
Accessories
Quality Products. Service Excellence.
