GB1205PHV2-8AY

SUNON
MODEL : GB1205PHV2-8AY
PERFORMANCE CURVES
STATIC
PRESSURE
mm-H
2
O Inch-H
2
O
SPEC. NO. B500040 REVISE DATE
ISSUE DATE 10. 22. 2002 E D I T I O N 0
建準電機工業股份有限公司
建準電機工業股份有限公司建準電機工業股份有限公司
建準電機工業股份有限公司
SUNONWEALTH ELECTRIC
MACHINE INDUSTRY CO., LTD
.
P A G E 4 OF 6
0
2 4
m
3
/min
CFM
0.40
0.20
12
8
4
0
12 VDC
0
0.056
0.112
SUNON
MATERIAL
2-1. Frame : Thermoplastic PBT of UL 94V-0
2-2. Impeller : Thermoplastic PBT of UL 94V-0
2-3. Bobbin : Thermoplastic PBT of UL 94V-0
2-4. Lead Wire : UL1061,26AWG,+RED;-BLACK
DIMENSIONS
1.One directional exhaust
2.The Best Mounting Direction: Fan blade face up or shaft horizontal direction.
UNITS
mm
SPEC. NO. B500040 REVISE DATE
ISSUE DATE 10. 22. 2002 E D I T I O N 0
建準電機工業股份有限公司
建準電機工業股份有限公司建準電機工業股份有限公司
建準電機工業股份有限公司
SUNONWEALTH ELECTRIC
MACHINE INDUSTRY CO., LTD
.
P A G E 5 OF 6
SUNON
Notes
1. SUNON will not guarantee the products if the application conditions exceed those
set out in this specification.
2. A written request should be submitted to SUNON prior to acceptance if deviation
from this specification is required.
3. Caution should be exercised when handling the fan. Damages may be resulted
when apply pressure to the impeller or hold the fan by the lead wires.
4. No guarantee on the products against the safety problem or failure caused by powder
dust, drop of water or insect.
5. This specification sheet precedes all other information and should be used as the
principal reference for the product to which it refers.
6. To satisfy the SUNON Management Information System, please indicate SPEC. NO.
on every order.
7. It is important that the correct polarity is established before connecting the fan to the
electrical supply. Black (0V) , Red(+V). If cautions is not taken, immediate damage
may occur on fans that do not have polarity protection.
8. SUNON fans are not suitable to be used in an environment that contains aggressive
or corrosive fluids.
9. Always ensure that fans are stored according to the storage temperatures specified.
Do not store in an environment with a high humidity level. If the fans were stored for
longer than 6 months, it is highly recommended to apply functional testing before
shipping.
10.Not all fans incorporate the Lock Rotor Protection feature. For fans that do not
incorporate this feature it is important not to prevent the rotation of the impeller.
Doing so, will lead to failure.
11.During installation, caution should be taken when mounting the fan. Incorrect
mounting can cause excess resonance, vibration and noise.
12.
During testing it is important to consider safety at all times. A suitable guard should
be fitted to the fan to prevent personal injury.
13.Unless otherwise stated, all tests are carried out at relative temperature and humidity
conditions of 25
, 65%.
SPEC.NO B500040 REVISE DATE
ISSUE DATE 10. 22. 2002 E D I T I O N 0
建準電機工業股份有限公司
建準電機工業股份有限公司建準電機工業股份有限公司
建準電機工業股份有限公司
SUNONWEALTH ELECTRIC
MACHINE INDUSTRY CO., LTD.
P A G E 6 OF 6

GB1205PHV2-8AY

Mfr. #:
Manufacturer:
Description:
FAN BLOWER 51.6X15MM 12VDC WIRE
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet