16
All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9001quality systems.
Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without
notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and
reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result
from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
FN7105.5
August 11, 2015
EL8200, EL8201, EL8401
Mini SO Package Family (MSOP)
1
(N/2)
(N/2)+1
N
PLANE
SEATING
N LEADS
0.10 C
PIN #1
I.D.
E1E
b
DETAIL X
3° ±3°
GAUGE
PLANE
SEE DETAIL "X"
c
A
0.25
A2
A1
L
0.25 C A B
D
A
M
B
e
C
0.08 C A B
M
H
L1
MDP0043
MINI SO PACKAGE FAMILY
SYMBOL
MILLIMETERS
TOLERANCE NOTESMSOP8 MSOP10
A 1.10 1.10 Max. -
A1 0.10 0.10 ±0.05 -
A2 0.86 0.86 ±0.09 -
b 0.33 0.23 +0.07/-0.08 -
c 0.18 0.18 ±0.05 -
D 3.00 3.00 ±0.10 1, 3
E 4.90 4.90 ±0.15 -
E1 3.00 3.00 ±0.10 2, 3
e 0.65 0.50 Basic -
L 0.55 0.55 ±0.15 -
L1 0.95 0.95 Basic -
N 8 10 Reference -
Rev. D 2/07
NOTES:
1. Plastic or metal protrusions of 0.15mm maximum per side are not
included.
2. Plastic interlead protrusions of 0.25mm maximum per side are
not included.
3. Dimensions “D” and “E1” are measured at Datum Plane “H”.
4. Dimensioning and tolerancing per ASME Y14.5M-1994.
