IXA611S3

Features
Floating High Side Driver with boot-strap Power
supply along with a Low Side Driver.
Fully operational to 650V
± 50V/ns dV/dt immunity
Gate drive power supply range: 10 - 35V
Undervoltage lockout for both output drivers
Separate Logic power supply range: 3.3V to V
CL
• Built using the advantages and compatibility
of CMOS and IXYS HDMOS
TM
processes
Latch-Up protected over entire
operating range
High peak output current: 600 mA
• Matched propagation delay for both outputs
Low output impedance
Low power supply current
• Immune to negative voltage transients
Preliminary Data Sheet
IXA611
First Release
Copyright © IXYS CORPORATION 2004
General Description
The IXA611 is a Bridge Driver for N-channel MOSFETs and
IGBTs with a high side and low side output, whose input
signals reference the low side. The High Side driver can
control a MOSFET or IGBT connected to a positive buss
voltage up to 650V. The logic input stages are compatible with
TTL or CMOS, have built-in hysteresis and are fully immune to
latch up over the entire operating range. The IXA611 can
withstand dV/dt on the output side up to ± 50V/ns.
The IXA611 comes in either the 16-PIN SOIC package
(IXA611S3) or the 14-PIN DIP through-hole package
(IXA611P7)
Figure 1. Typical Circuit Connection
600mA Half-Bridge Driver
Applications
Driving MOSFETs and IGBTs in half-bridge circuits
High voltage, high side and low side drivers
Motor Controls
Switch Mode Power Supplies (SMPS)
DC to DC Converters
Class D Switching Amplifiers
Warning: The IXA611 is ESD sensitive.
DS99166(04/04)
IXA611S3
2
IXA611
Figure 2 - IXA611 Functional Block Diagram
Pin Description And Configuration
SYMBOL FUNCTION DESCRIPTION
VDD Logic Supply Positive power supply for the chip CMOS functions
HIN HS Input High side Input signal, TTL or CMOS compatible; HGO in phase
LIN LS Input Low side Input signal, TTL or CMOS compatible; LGO in phase
ENB Enable Chip enable. When driven high, both outputs go low.
DG Ground Logic Reference Ground
VCH Supply Voltage High Side Power Supply
HGO Output High side driver output
HS Return High side voltage return pin
VCL Supply Voltage Low side power supply. This power supply provides power for
both outputs. Voltage range is from 4.5 to 25V.
LGO Output Low side driver output
LS Ground Low side return
IXA611P7
IXA611S3
IXYS ICs are covered by US Patent No. 6,759,692
3
IXA611
Symbol Definition Min Max Units
V
CH
High side floating supply voltage -25 650 V
V
HS
High side floating supply offset voltage V
CH
-200 V
CH
+.3 V
V
HGO
High side floating output voltage V
HS
-.3 V
CH
+.3 V
V
CL
Low side fixed supply voltage -0.3 35 V
V
LGO
Low side output voltage -0.3 V
CL
+.3 V
V
DD
Logic supply voltage -0.3 V
DG
+35 V
V
DG
Logic supply offset voltage V
LS
-3.8 V
LS
+3.8 V
V
IN
Logic input voltage(HIN & LIN) V
SS
-.3 V
DD
+.3 V
dV
S
/dt Allowable offset supply voltage transient 50 V/ns
P
D
Package power dissipation@ T
A
25C 1 W
P
D
Package power dissipation@ T
C
25C 2.1 W
R
THJA
Thermal resistance, junction-to-ambient 125 K/W
R
THJc
Thermal resistance, junction-to-case 60 K/W
T
J
Junction Temperature 150
o
C
T
S
Storage temperature -55 150
o
C
T
L
Lead temperature (soldering, 10 s) 300
o
C
Absolute Maximum Ratings
Symbol Definition Min Max Units
V
CH
High side floating supply absolute voltage V
HS
+10 V
HS
+20 V
V
HS
High side floating supply offset voltage -20 650 V
V
HGO
High side floating output voltage V
HS
V
CH
+20 V
V
CL
Low side fixed supply voltage 10 20 V
V
LGO
Low side output voltage 0 V
CC
V
V
DD
Logic supply voltage V
DG
+3 V
DG
+20 V
V
DG
Logic supply voffset voltage V
LS
-1 V
LS
+1 V
V
IN
Logic input voltage(HIN, LIN, ENbar) V
DG
V
DD
V
T
A
Ambient Temperature -40 125
o
C
Recommended Operating Conditions
Ordering Information
Part Number
Package Type
IXA611P7 14-PIN DIP
IXA611S3 16-PIN SOIC

IXA611S3

Mfr. #:
Manufacturer:
Description:
IC DRIVER HALF BRDG 600MA 16-SOI
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet