1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com
89
Coating
Molded lead free vitreous enamel
Core
Ceramic
Terminals
Solder-coated copper clad axial. RoHS solder composition is 96% Sn, 3.5% Ag, 0.5% Cu
Derating
Linearly from 100% @ +25°C to 0% @ +350°C
Tolerance
±5% (other tolerances available)
Power rating
Based on 25°C free air rating (other wattages available*)
Maximum ohmic values
See chart
Overload
Under 11 watts: 5 times rated wattage for 5 seconds. 11 watts: 10 times rated wattage for 5 seconds
Temperature coefficient
1 to 9.99Ω: ±100 ppm/°C; 10Ω and over: ±30 ppm/°C
Dielectric withstanding voltage
500 VAC: 1W rating; 1000 VAC: 2, 3, 5 and 11W
90 Series
Lead Free Vitreous Enamel Molded
Axial Term. Wirewound, 5% Tolerance Standard
Series Wattage* Ohms Voltage
91 1.5 0.1Ω-3.6K 150
92 2.25 0.1Ω-3.5K 85
93 3.25 0.1Ω-10.5K 200
95 5.0 0.1Ω-25K 495
96 6.5 0.1Ω-50K 625
90 11.0 0.1Ω-91K 1080
* 2x power ratings by using heat-sink mounting clips shown on following page.
Note: Due to space restrictions, parts are stamped with wattage ratings reduced to the
nearest whole number. The actual wattage ratings are as published in this catalog.
Series Wattage Length Diameter Lead gauge
91 1.5 0.452 / 11.5 0.140 / 3.6 24
92 2.25 0.405 / 10.3 0.219 / 5.6 20
93 3.25 0.577 / 14.7 0.234 / 5.9 20
95 5.0 0.968 / 24.6 0.265 / 6.7 20
96 6.5 0.952 / 24.2 0.343 / 8.7 20
90 11.0 1.811 / 46.0 0.343 / 8.7 20
When you need the highest quality wirewound axial
terminal resistors available, choose Ohmite’s 90
Series resistors.
They are manufactured by a unique process that
molds the vitreous enamel over the resistive ele-
ment, helping to ensure consistent dimensions.
This uniformity permits 90 Series resistors to be
mounted in clips, creating a heat-sinking benefit (see
next page).
The durable vitreous enamel coating, which is totally
lead free, permits the 90 Series resistors to maintain
a hard coating while operating at high temperatures.
Mechanical integrity is enhanced by the all-welded
construction.
FEATURES
•MoldedConstructionprovidesconsistentshape
and size (Permits mounting in clips which extends
power rating).
•MeetsMIL-R-26requirementsforinsulatedresis-
tors.
•All-weldedconstruction.
•Flameresistantleadfreevitreousenamelcoating.
•Higherratingsinsmallersizes.
•Heatsinkmountingclipsavailable.
•RoHScompliant;add“E”suffixtopartnumberto
specify.
CHARACTERISTICS
SERIES SPECIFICATIONS
DIMENSIONS
(in./mm max.)
(continued)