PR01, PR02, PR03
www.vishay.com
Vishay BCcomponents
Revision: 01-Mar-16
18
Document Number: 28729
For technical questions, contact: filmresistorsleaded@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PR01, PR02 WITH RADIAL TAPING
PR01 - Height for insertion (max.) = 32 mm
PR02 - Height for insertion (max.) = 29 mm
MARKING
The nominal resistance and tolerance are marked on the resistor using four or five colored bands in accordance with IEC 60062,
marking codes for resistors and capacitors.
P
P
2
W
W
0
D
0
P
1
P
0
L
1
L
F
H
0
H
1
H
α = 30° to 40°
α
α
aa
DIMENSIONS in millimeters
Pitch of components P 12.7 ± 1.0
Feed-hole pitch P
0
12.7 ± 0.2
Feed-hole centre to lead
at topside at the tape
P
1
3.85 ± 0.5
Feed-hole center to body center P
2
6.35 ± 1.0
Lead spacing F 4.8 +0.7/-0
Width of carrier tape W 18.0 ± 0.5
Minimum hold down tape width W
0
5.5
Height for insertion (max.) H1 32
Lead wire clinch height H
0
16.5 ± 0.5
Body to hole center H 19.5 ± 1
Feed-hole diameter D
0
4.0 ± 0.2
Height for cutting (max.) L 11.0
Minimum lead wire (tape portion)
shortest lead
L
1
2.5
P
P
2
W
W
0
D
0
P
1
P
0
L
1
L
F
H
0
H
1
H
α = 30° to 40°
α
α
aa
DIMENSIONS in millimeters
Pitch of components P 12.7 ± 1.0
Feed-hole pitch P
0
12.7 ± 0.2
Feed-hole centre to lead
at topside at the tape
P
1
3.85 ± 0.5
Feed-hole center to body center P
2
6.35 ± 1.0
Lead spacing F 4.8 +0.7/-0
Width of carrier tape W 18.0 ± 0.5
Minimum hold down tape width W
0
5.5
Height for insertion (max.) H1 29
Lead wire clinch height H
0
16.5 ± 0.5
Body to hole center H 19.5 ± 1
Feed-hole diameter D
0
4.0 ± 0.2
Height for cutting (max.) L 11.0
Minimum lead wire (tape portion)
shortest lead
L
1
2.5