HX-SCE-1K-9.5-50-SS1-4 Datasheet ED0813-000, ED5906-000, ED8414-000 | P1-P2

TECHNICAL DATA SHEET

TE Document:

TTDS-108

Issue:

Date:

July 2014

| Indicates Change

Class I Data Classification - See Policy TEC-02-04

Page 1 of 2

HX – LFH Heat Shrink

Marker Sleeve

HX Low Fire Hazard (LFH) marker sleeves for the identification of wires

and cables. Presented as cut sleeves organised in a ladder format.

Manufactured using a specially developed radiation cross-linked

material. Formulated to give Low Fire Hazard properties, which allow

this product to be used in locations where fire may pose a risk to

human life, and property. Typical installations include rail, mass transit,

and heavy industrial.

HX (LFH) marker sleeves are available as part of a complete printing

system. The system comprises specific printers, thermal transfer

ribbons and WINTOTAL software.

KEY FEATURES

TEMPERATURE RATING

 Zero Halogen

 Low Toxic Fumes

 Low Smoke

 Self-extinguishing, non-flame propagating

 Low heat release rate

 Resistant to key industrial and rail fluids

(defined by RW-2072)

 Excellent resistance to burning

- typical LOI 39%

 Sleeve diameters from 2.4mm to 38.1mm

 Shrink ratio 2:1

Operating Temperature Range -55°C to 105°C (-40°F to 221°F)

ENVIRONMENTAL

Does not contain any declarable or prohibited substances from the

UNIFE Railway Industry Substances List

No Halogens, Sulphur, Nitrogen, Phosphorus and Cadmium sources

above trace level. The flame retardant used in this product does not

contain melamine cyanurate.

Does not promote mould growth (ASTM G21 – zero rating)

Further information and a downloadable declaration covering RoHS

and REACH compliance can be found at the ‘TE Product Compliance

Support Centre’:

http://www.te.com/en/resources/product-compliance.html

APPLICATIONS

 Pre-termination Cable Identification

 Particularly suitable for locations with a fire

risk to human life or equipment

 Mass transit, Rail, Aerospace, Marine and

Industrial

SPECIFICATIONS / APPROVALS

TE Connectivity Standard

 RW-2072

Industrial

 London Underground 1-085, Fire Safety Performance of

Materials ‘Limited, dispersed usage’

 Registered for London Underground Product Acceptance and

Registration, revision S1011 A2: http://www.lu-apr.co.uk

 EN45545-2 ‘Hazard Classification 3’ Requirement Set

R22/R23 – unlimited use for railcar design and operation

category

 BS6853 ‘Vehicle Category Ia’

Interior minor use materials of mass 100g to 500g

 NF F 16-101 Railway rolling stock, fire behaviour, choice of

materials: Classification A1

PART DESCRIPTION

Pack Size

Scoring (optional)

Color

Expanded inside diameter (inches)

Product Family

-4.8-50

-S1

HX-SCE

-1K

-4

Sleeve length (mm)

Where possible, TE have tested product as a finished item, including the print. Operational tests are followed by an assessment of

mark adherence to validate fit form and function. Further details can be found in TE standard RW-2072.

TECHNICAL DATA SHEET

TE Document:

TTDS-108

Issue:

Date:

July 2014

| Indicates Change

Class I Data Classification - See Policy TEC-02-04

Page 2 of 2

ORDERING INFORMATION

HX – LFH Heat Shrink

Marker Sleeve

AVAILABLE FORMAT

OPTIONS

Prescoring Perforated score to produce multiple marker sleeves from each HX-SCE sleeve.

Standard Not scored Code Blank

Non standard Side scored Code SS

Sided scored w ith one pre score Code SS1

1 Prescore Code S1

2 Prescores Code S2

3 Prescores Code S3

Packaging sizes

Standard 1K -

Non Standard 2.5k -

5k -

Colors

Standard Yellow White

Code 4 9

Non standard Red Green Blue Orange

Code 2 5 6 3

5000 pieces available for 2.4 and 3.2

HX-SCE sizes

250 piece package available for all

HX-SCE sizes

1000 piece packages available

for all HX-SCE sizes upto to 25.4

2500 pieces available for 4.8 and

6.4 HX-SCE sizes up to 25.4

Specify product name, pack size, sleeve size, sleeve length (always

50) pre-score (blank if not required) and colour.

Ordering example: HX-SCE-1K-4.8-50-S1-4

mm inches mm inches

HX-SCE-1K-2.4-50-<score>-<color> 2.4 0.094

1.19 0.047

1.27 - 1.90 0.050 - 0.075

HX-SCE-1K-3.2-50-<score>-<color> 3.2 0.126

1.58 0.060

1.77 - 2.66 0.069 - 0.105

HX-SCE-1K-4.8-50-<score>-<color> 4.8 0.189

2.36 0.090

2.54 - 4.06 0.100 - 0.160

HX-SCE-1K-6.4-50-<score>-<color> 6.4 0.250

3.18 0.125

3.81 - 5.46 0.150 - 0.215

HX-SCE-1K-9.5-50-<score>-<color> 9.5 0.375

4.75 0.187

5.59 - 8.12 0.220 - 0.320

HX-SCE-1K-12.7-50-<score>-<color> 12.7 0.500

6.35 0.250

6.99 - 10.79 0.275 - 0.425

HX-SCE-1K-19.0-50-<score>-<color> 19.0 0.730

9.53 0.375

10.16 - 16.25 0.400 - 0.640

HX-SCE-1K-25.4-50-<score>-<color> 25.4 1.000

12.70 0.500

14.29 - 21.59 0.563 - 0.850

HX-SCE-38.1-50-<score>-<color> 38.1 1.500

19.05 0.750

20.95 - 33.02 0.825 - 1.300

Standard pack size for 38.1 is 250 pieces

Ordering description

Inside diameter

Recommended w ire diameter

use range

inches

As supplied

(minimum)

After

recovery

(Maximum)

PRINTER INFORMATION

SOFTWARE

Print Quality and Print Performance can only be

guaranteed when specific TE printer and ribbons are used.

The current list of printers and ribbons can be found in TE

document 411-121005 ‘Identification Printer Product

Ribbon Matrix’

This document can be found at the TE document centre:

http://www.te.com/commerce/DocumentDelivery/DDECont

roller

Cable Markers are fully supported by WINTOTAL and PrintEasy label

printing software, available from the TE product store:

http://www.te.com/en/general/label-printing-software.html

Contact a TE representative for further information

While TE has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is error-free, nor does TE

make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any

adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained

herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for

reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and

design specifications.

*Trademark. TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or company names may be trademarks of their

respective owners.

P1-P2

HX-SCE-1K-9.5-50-SS1-4

Mfr. #:

Buy HX-SCE-1K-9.5-50-SS1-4

Manufacturer:

TE Connectivity

Description:

HX-SCE-1K-9.5-50-SS1-4

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

HX-SCE-1K-9.5-50-SS1-4

HX-SCE-1K-9.5-50-SS1-4

Products related to this Datasheet