RCWL
www.vishay.com
Vishay Dale
Revision: 06-Dec-11
3
Document Number: 20018
For technical questions, contact: ff2cresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
• Embossed carrier tape per EIA-481-1A.
Short time overload 2 x rated power; duration according the model ± (0.5 % + 0.005 ) R
High temperature exposure MIL-STD-202, method 108, 1000 h at T = 125 °C, 0 % power ± (2.0 % + 0.005 ) R
Temperature cycling JESD 22, method JA-104, 1000 cycles (- 55 °C to + 125 °C) ± (2.0 % + 0.005 ) R
Biased humidity MIL-STD-202, method 103, 1000 h 85 °C/85 % RH, 10 % x (P x R)
1/2
± (2.0 % + 0.005 ) R
Mechanical shock MIL-STD-202, method 213, condition C, 10 g’s, 6 ms (half sine), 3 directions ± (0.5 % + 0.005 ) R
Vibration MIL-STD-202, method 204, 5 g’s, 20 min, 12 cycles, 3 directions, 10 Hz to 2000 Hz ± (0.5 % + 0.005 ) R
Operational life MIL-STD-202, method 108, 1000 h at T = 125 °C at rated power ± (2.0 % + 0.005 ) R
Resistance to solder heat
MIL-STD-202, method 210, + 260 °C solder,
10 s to 12 s dwell, 25 mm/s emergence
± (1.0 % + 0.005 ) R
Moisture resistance MIL-STD-202, method 106, 0 % power, 7a and 7b not required ± (2.0 % + 0.005 ) R
PACKAGING
MODEL
REEL
TAPE WIDTH DIAMETER PITCH PIECES/REEL CODE
RCWL0402 8 mm/punched paper 180 mm/7" 2 mm 10 000 EA
RCWL0603 8 mm/punched paper 180 mm/7" 4 mm 5000 EA
RCWL0805 8 mm/punched paper 180 mm/7" 4 mm 5000 EA
RCWL1206 8 mm/punched paper 180 mm/7" 4 mm 5000 EA
RCWL1210 12 mm/punched paper 180 mm/7" 4 mm 5000 EA
RCWL1218 12 mm/embossed plastic 180 mm/7" 4 mm 4000 EA
RCWL2010 12 mm/embossed plastic 180 mm/7" 4 mm 4000 EA
RCWL2512 12 mm/embossed plastic 180 mm/7" 8 mm 2000 EA
PERFORMANCE
TEST CONDITIONS OF TEST TEST LIMITS