2873.000.01 Datasheet 2873.000.01 | P1-P3

Multi-tag Reader Modules

ID CPR (13.56 MHz)

FEATURES



Also available as USB variant



Data rates up to 847 kBit/s



Low power consumption



Command Queue for explicit reduction

of communication cycles between host

and reader module



Supports NFC applications



Order description: ID CPR40.0x / ID CPR.M02.VP/AB-x

Special advices:

• The higher operation speed is caused by the so-called „Command Queue“. With this Command Queue a sequence of

commmands can be sent to the reader module within one poll.

The result is an explicit reduction of communication cycles between host and reader.

• Beside the six reader modules ID CPR40.0x, the ISO 15693 / ISO14443-reader modules

ID CPR.M02.VP/AB-B and -BA resp. ID CPR.M02.VP/AB-C and -CA are available.

Reader modules with integrated antenna

ID CPR40.00-A

ID CPR40.00-CDUSB

ID CPR.M02.VP/AB-B

ID CPR.M02.VP/AB-C

Dimensions

50 x 50 x 14 mm

RS232-TTL interface

x

Data/Clock interface

x

Wiegand interface

x

RS232 interface

x

USB interface

x

Supply voltage

5V

ISO 14443-A/-B

x

ISO 14443 Part 4 Support

x

TCL Firmware

Mifare classic read / write

x

ISO 15693

x

I-CODE1

x

Data rate

106-847 kBit/s

106 kBit/s

NFC compatibility

x

Current consumption

130 mA

300 mA

Read 64 Byte mifare

classic

2,6 ms

4,1 ms

RF transmitting power

100 mW

250 mW

Command Queue

x

Accessories:

- ID ISC.ANT40/30 External antenna 40 mm x 30 mm

- ID ISC.ANT100/100 External antenna 100 mm x 100 mm

- ID NET.5V 5V power supply

- ID CO.RS232/LVTTL-A Converter LVTTL to RS232

- ID CO.RS232/TTL-A Converter TTL to RS232

- ID CAB.RS-A Cable for RS232/485 and power supply

- ID CAB.A-A Adapter cable, 10 cm

Note: Errors and technical alterations reserved. Not recommended for new design.

The information is given in April 2017.



Order description: ID CPR40.0x / ID CPR.M02.VP/AB-x

Reader modules for operation with external antennas

ID CPR40.01-A

ID CPR40.01-CDUSB

ID CPR.M02.VP/AB-BA

ID CPR.M02.VP/AB-CA