https://www.phoenixcontact.com/pi/products/1407322
04/28/2017Page2/4
Sensor/Actuator cable-SAC-4P-10,0-28R/FR SCO RAIL-1407322
Technical data
General
Shock, vibration EN 50155
Status display No
Protective circuit/component Unwired
Overvoltage category II
Degree of pollution 3
Insertion/withdrawal cycles ≥ 100
Torque 0.4 Nm (M12 connector)
Material
Flammability rating according to UL 94 V0
Contact material CuSn
Contact surface material Ni/Au
Contact carrier material PA 6.6
Material of grip body PA 6.6
Material, knurls Zinc die-cast, nickel-plated
Sealing material NBR
Standards/regulations
PA 6.6: Fire protection in rail vehicles - requirement sets R22, R23, and
R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)
Standards and Regulations
Standard designation M12 connector
Standards/regulations IEC61076-2-101
Standard designation Shock, vibration
Standards/regulations EN 50155
Flammability rating according to UL 94 V0
Cable
Cable type
Shielded black RADOX
®
Cable type (abbreviation) 28R
Conductor cross section 4x 0.5 mm²
AWG signal line 20
Conductor structure signal line 19x 0.18 mm
Core diameter including insulation 1.43 mm
Wire colors White 1, white 2, white 3, white 4
Overall twist 4 wires, twisted
Shielding Tinned copper braided shield
External sheath, color black
External cable diameter D 5.4 mm ±0,3 mm
Minimum bending radius, fixed installation 3 x D
Minimum bending radius, flexible installation 4 x D
Cable weight 56 kg/km
Outer sheath, material PE-X