1 x 2 HDMI over Cat5/Cat6 Extender Kit, Box-
Style Transmitter and Receiver, 1080p @60Hz up
to 150-ft., TAA
MODEL NUMBER: B126-2A1
Transmitter and receiver work in tandem to extend an HDMI signal via a single Cat5e/6 cable to 2
projectors, monitors or televisions. Ideal for digital signs, schools and trade show presentations.
Description
The B126-2A1 HDMI over Cat5/Cat6 Extender Kit includes a transmitter unit and a receiver unit that work
in tandem to extend an HDMI signal to two projectors, monitors or televisions. The kit is ideal for digital
signs, trade shows, presentations, classrooms, churches, retail settings and other applications where the
video source is located farther than conventional cables allow or that require multiple displays connected
to one source.
HDMI cable (see Tripp Lite’s P568-Series) connects the local monitor and the audio/video source to the
transmitter’s HDMI ports and two monitors to the receiver. Cat5e/6 cable (for best results, use 24 AWG
solid-wire Cat5e/6 cable, such as Tripp Lite’s N202-Series) connects the two units.
The B126-2A1 can extend a 1080i (60 Hz) signal up to 200 feet, a 1080p (60 Hz) signal up to 150 feet and
a 3D signal up to 125 feet. You can connect up to three B126-110 remote repeaters in the chain for a
maximum of six HDMI displays and full signal extension of 700 feet (1080i), 500 feet (1080p) or 400 feet
(3D).
In addition to crystal-clear video, the B126-2A1 delivers full, rich stereo and 7.1-channel surround sound
(multi-channel or PCM) audio. Built-in equalization control lets you fine-tune the image quality at each
remote display. Supports 24-bit True Color (8 bits per channel) and HDCP compatibility. Easy to set up
with no software or drivers to install. Mounts to a wall, rack or pole using the included hardware.
Features
Extends High-Definition Signals
Highlights
Supports high-definition video
resolutions up to 1080p (60 Hz)
●
Supports stereo and 7.1-
channel surround sound audio
●
Works with all operating
systems and HDMI video
sources
●
Plug and play—no software or
drivers to install
●
Built-in equalization control lets
you adjust monitor image
●
System Requirements
For international use, a power
supply with the appropriate plug
type must be purchased
separately.
●
Package Includes
Transmitter unit
●
Receiver unit
●
Screwdriver for adjusting
equalization
●
(2) External Power Supplies with
NEMA 1-15P Plug(Input: 100-
240V, 50/60Hz, 0.5A; Output:
5V, 2A, 5 ft.)
●
Mounting hardware
●
Owner’s Manual
●
1 / 3