CAT6219-250TDGT3

CAT6219
http://onsemi.com
10
PACKAGE DIMENSIONS
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DIMENSION b APPLIES TO PLATED
TERMINAL AND IS MEASURED BETWEEN
0.15 AND 0.30mm FROM TERMINAL TIP.
4. COPLANARITY APPLIES TO THE EXPOSED
PAD AS WELL AS THE TERMINALS.
C
A
SEATING
PLANE
D
E
0.10 C
A3
A
A1
2X
2X
0.10 C
WDFN6 1.5x1.5, 0.5P
CASE 511BJ01
ISSUE B
DIM
A
MIN MAX
MILLIMETERS
0.70 0.80
A1 0.00 0.05
A3 0.20 REF
b 0.20 0.30
D
E
e
L
PIN ONE
REFERENCE
0.05 C
0.05 C
A0.10 C
NOTE 3
L2
e
b
B
3
6
6X
1
4
0.05 C
MOUNTING FOOTPRINT*
L1
1.50 BSC
1.50 BSC
0.50 BSC
0.40 0.60
--- 0.15
GENERIC
MARKING DIAGRAM*
*This information is generic. Please refer to
device data sheet for actual part marking.
PbFree indicator, “G” or microdot “ G”,
may or may not be present.
BOTTOM VIEW
L
5X
DIMENSIONS: MILLIMETERS
0.73
6X
0.35
5X
1.80
0.50
PITCH
*For additional information on our PbFree strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
L1
DETAIL A
L
ALTERNATE TERMINAL
CONSTRUCTIONS
A1
A3
DETAIL B
MOLD CMPDEXPOSED Cu
ALTERNATE
CONSTRUCTIONS
DETAIL B
DETAIL A
L2
0.50 0.70
TOP VIEW
B
SIDE VIEW
NOTE 4
RECOMMENDED
0.83
X = Specific Device Code
M = Date Code
G = PbFree Package
X MG
G
1
(*Note: Microdot may be in either location)
CAT6219
http://onsemi.com
11
ORDERING INFORMATION (Notes 7 9)
Device Order Number
Specific
Device
Marking
Package
Type
V
OUT
Voltage (V)
Lead Finish Shipping (Note 10)
CAT6219125TDGT3 US
TSOT235
1.25
NiPdAu
Tape & Reel, 3,000 Units / Reel
CAT6219180TDGT3 RV 1.80
CAT6219250TDGT3 US 2.50
CAT6219280TDGT3 RV 2.80
CAT6219285TDGT3 RV 2.85
CAT6219300TDGT3 US 3.00
CAT6219330TDGT3 RV 3.30
CAT6219ADJTDGT3 UM Adjustable
CAT6219ADJVP5GT4 AF
TDFN6
(2.0 x 2.0)
Adjustable
Tape & Reel, 4,000 Units / Reel
CAT6219180VP5GT4 AB 1.80
CAT6219VP5330GT4 AB 3.30
CAT6219280MV2T3 S
WDFN6
(1.5 x 1.5)
2.80
Tape & Reel, 3,000 Units / Reel
CAT6219285MV2T3 T 2.85
CAT6219330MV2T3 U 3.30
CAT6219ADJMV2T3 V Adjustable
7. All packages are RoHScompliant (Leadfree, Halogenfree).
8. The standard lead finish is NiPdAu preplated (PPF) lead frames.
9. For other voltage options, please contact your nearest ON Semiconductor Sales office.
10.For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
11. For detailed information and a breakdown of device nomenclature and numbering systems, please see the ON Semiconductor Device
Nomenclature document, TND310/D, available at www.onsemi.com
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks,
copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/PatentMarking.pdf. SCILLC
reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any
particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without
limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications
and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC
does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for
surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where
personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and
its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly,
any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture
of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 8002829855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81358171050
CAT6219/D
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 3036752175 or 8003443860 Toll Free USA/Canada
Fax: 3036752176 or 8003443867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your loca
l
Sales Representative

CAT6219-250TDGT3

Mfr. #:
Manufacturer:
ON Semiconductor
Description:
LDO Voltage Regulators LDO X V 500mA
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union