SPEC NO: DSAD1035 REV NO: V.9 DATE: JUN/01/2007 PAGE: 2 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1203000559
Selection Guide
Notes:
1. >1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity/ luminous Flux: +/-15%.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Dice Lens Type
Angle [1]
Min. Typ. 2<1/2
APA3010EC High Efficiency Red (GaAsP/GaP) WATER CLEAR 4 15
120
°
Iv (mcd) [2]
@ 20mA
Symbol Parameter Device Typ. Max. Units Test Conditions
Cpeak Peak Wavelength High Efficiency Red 627 nm I
F=20mA
CD [1] Dominant Wavelength High Efficiency Red 625 nm I
F=20mA
IC1/2 Spectral Line Half-width High Efficiency Red 45 nm I
F=20mA
C Capacitance High Efficiency Red 15 pF V
F=0V;f=1MHz
V
F [2] Forward Voltage High Efficiency Red 2 2.5 V IF=20mA
I
R Reverse Current High Efficiency Red 10 uA VR=5V
Parameter High Efficiency Red Units
Power dissipation 75 mW
DC Forward Current 30 mA
Peak Forward Current [1] 160 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C