https://www.phoenixcontact.com/pi/products/1584402
08/18/2018Page1/4
Contact insert-HC-D 25-I-CT-F-1584402
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
HEAVYCON female insert, D25 series, 25-pos., crimp connection
Why buy this product
Can be used in rail vehicles, satisfy DIN EN 45545-2 with requirement sets R22, R23, and R24 in hazard levels HL1, HL2, and HL3.
Key Commercial Data
Packing unit 1 STK
GTIN
GTIN 4046356142663
Technical data
General
Note
For HEAVYCON housing type D25, CK1,6-ED crimp contacts (crimp
contacts not supplied as standard)
Connection method Crimp connection
Degree of pollution 3
Overvoltage category III
Number of positions 25+PE
Insertion/withdrawal cycles ≥ 500
Size D25
Conductor cross section 0.14 mm² ... 2.5 mm²
Connection cross section AWG 26 ... 14
Stripping length of the individual wire 8 mm (0.14...1.5mm²)
6 mm (2.5 mm²)
Assembly instructions
- Use of HC-CST (1676857) coding pins and HC-CBU (1676860) coding
sockets has been prescribed.
Connection Connectors may be plugged in only when there is no load/voltage.