OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

HMC902LP3ETR

P1-P3P4-P6P7-P8
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LOW NOISE - SMT
7
7 - 4
Current vs. Input Power @ 7 GHz
78
80
82
84
86
88
-30 -27 -24 -21 -18 -15 -12 -9 -6 -3 0 3
Idd (mA)
INPUT POWER (dBm)
Outline Drawing
Absolute Maximum Ratings
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Drain Bias Voltage +4.5V
RF Input Power +10 dBm
Gate Bias Voltage, Vgg1 -0.8V to +0.2V
Gate Bias Voltage, Vgg2 -0.8V to +0.2V
Channel Temperature 150 °C
Continuous Pdiss (T = 85 °C)
(derate 7 mW/°C above 85 °C)
0.45 W
Thermal Resistance
(Channel to ground paddle)
143.8 °C/W
Storage Temperature -65 to +150 °C
Operating Temperature -40 to +85 °C
HMC902LP3E
v01.0310
GaAs pHEMT MMIC LOW NOISE
AMPLIFIER, 5 - 10 GHz
NOTES:
1. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED
PLASTIC SILICA AND SILICON IMPREGNATED.
2. LEAD AND GROUND PADDLE MATERIAL: COPPER ALLOY.
3. LEAD AND GROUND PADDLE PLATING: 100% MATTE TIN
4. DIMENSIONS ARE IN INCHES [MILLIMETERS].
5. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
6. PAD BURR LENGTH SHALL BE 0.15mm MAX. PAD BURR HEIGHT SHALL
BE 0.05mm MAX.
7. PACKAGE WARP SHALL NOT EXCEED 0.05mm
8. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO
PCB RF GROUND.
9. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED PCB LAND
PATTERN.
Part Number Package Body Material Lead Finish Package Marking
[1]
HMC902LP3E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn
[2]
902
XXXX
[1] 4-Digit lot number XXXX
[2] Max peak reow temperature of 260 °C
Package Information
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LOW NOISE - SMT
7
7 - 5
HMC902LP3E
v01.0310
GaAs pHEMT MMIC LOW NOISE
AMPLIFIER, 5 - 10 GHz
Pin Descriptions
Pin Number Function Description Interface Schematic
1, 2, 5, 8,
11 - 13, 16
N/C
The pins are not connected internally; however, all data
shown herein was measured with these pins connected to RF/
DC ground externally.
3 RFIN
This pin is AC coupled
and matched to 50 Ohms
4, 9 GND
Package bottom has exposed metal ground paddle
that must be connected to RF/DC ground.
6, 7 Vgg1, Vgg2
Optional gate control for amplier. If left open, the amplier
will run self-biased at standard current. Negative volt-
age applied will reduce drain current. External capacitors
required, see application circuits herein.
10 RFOUT
This pin is AC coupled
and matched to 50 Ohms
14, 15 Vdd2, Vdd1
Power supply voltage for the amplier. See assembly
for required external components.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LOW NOISE - SMT
7
7 - 6
HMC902LP3E
v01.0310
GaAs pHEMT MMIC LOW NOISE
AMPLIFIER, 5 - 10 GHz
Item Description
J1, J2 SMA Connector
J3, J4, J6 - J8 DC Pins
C1, C4, C7, C10 100 pF Capacitor, 0402 Pkg.
C2, C5, C8, C11 10 KpF Capacitor, 0402 Pkg.
C3, C6, C9, C12 4.7 µF Capacitor, Tantalum
U1 HMC902LP3E Amplier
PCB
[2]
128395 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350 or Arlon 25FR
List of Material for Evaluation PCB 129787
[1]
The circuit board used in this application should
use RF circuit design techniques. Signal lines
should have 50 Ohm impedance while the pack-
age ground leads and exposed paddle should be
connected directly to the ground plane similar to
that shown. A sufficient number of via holes should
be used to connect the top and bottom ground
planes. The evaluation board should be mounted
to an appropriate heat sink. The evaluation circuit
board shown is available from Hittite upon request.
Evaluation PCB
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
P1-P3P4-P6P7-P8

HMC902LP3ETR

Mfr. #:
Buy HMC902LP3ETR
Manufacturer:
Analog Devices / Hittite
Description:
RF Amplifier Low Noise Amplifier SMT,5-10 GHz
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet