Input Voltage Range ±10%
Output Voltage Accuracy ±5%
Line Voltage Regulation 1.2%/1% of Vin typ.
Load Voltage Regulation 3.3V output types 20% max.
(10% to 100% full load) 5V output type 15% max.
9V, 12V, 15V, 24V output types 10% max.
Output Ripple and Noise (20MHz limited) 150mVp-p max.
Operating Frequency 20kHz min. / 50kHz typ. / 85kHz max.
Efficiency at Full Load 70% min. / 80% typ.
Minimum Load = 0% Specifications valid for 10% minimum load only.
Isolation Voltage (tested for 1 second) 1000VDC
(rated for 1 minute**) 500VAC / 60Hz
Isolation Voltage H-Suffix (tested for 1 second) 2000VDC
H-Suffix (rated for 1 minute**) 1000VAC / 60Hz
Isolation Capacitance 40pF min. / 115pF max.
Isolation Resistance 10 GΩ min.
Short Circuit Protection 1 Second
P-Suffix Continuous
Operating Temperature Range (free air convection) -40°C to +85°C (see Graph)
Storage Temperature Range -55°C to +125°C
Relative Humidity 95% RH
Package Weight 2.8g
Packing Quantity 25 pcs per Tube
MTBF (+25°C) using MIL-HDBK 217F 988 x 10
3
hours
(+85°C) using MIL-HDBK 217F 135 x 10
3
hours
Certifications
EN General Safety Report: SPCLVD1109103 EN60950-1:2006 + A12:2011
2 Watt
SIP7
Dual Output
Derating-Graph
(Ambient Temperature)
●
Low Cost 2W Dual Output Converter
●
Industry Standard SIP7 Packages
●
Power Sharing on Outputs
●
Optional Continuous Short Circuit Protected
●
1kVDC and 2kVDC Isolation Options
●
UL94V-0 Package Material
●
Efficiency to 86%
Features
Unregulated
Converters
}
Detailed Information see
Application Notes chapter "MTBF"
The RD series have been specifically designed for applications where dual power rails need to
be created from a single rail supply and a low cost solution is required. With efficiencies up to
85%, the full output power is available over the operating temperature range -40°C to +85°C
and the converters can be used in ambient temperatures of up to 100°C with derating. The wide
selection of industry standard input voltage and output voltage options plus an I/O-Isolation of
1kVDC or 2kVDC makes these converters suitable for many industrial applications.
Description
Specifications (measured at T
A
= 25°C, nominal input voltage, full load and after warm-up)
Refer to Application Notes
RoHS
2011/65/EU
6/6
**Any data referred to in this datasheet are of indicative nature and
based on our practical experience only. For further details, please
refer to our Application Notes.
Part Input Output Output Efficiency Max
Number Voltage Voltage Current Capacitive
SIP 7 2kV (VDC) (VDC) (mA) (%) Load
(1)
RD-xx05D (H) 5, 12, 24 ±5 ±200 75-82 ±470µF
RD-xx12D (H) 5, 12, 24 ±12 ±84 80-84 ±330µF
RD-xx15D (H) 5, 12, 24 ±15 ±66 82-86 ±330µF
RD-xx24D (H) 5, 12, 24 ±24 ±42 82-86 ±100µF
xx = Input Voltage. Other input and output voltage combinations available on request.
* add Suffix “P” for Continuous Short Circuit Protection, e.g. RD-0505D/P
* add Suffix „H“ for 2kV Isolation, e.g. RD-0505D/H, RD-0505D/HP
REV: 0/2015 E-91www.recom-power.com
