Panasonic Corporation 2013©
Panasonic Corporation Automation Controls Buisiness Division
industrial.panasonic.com/ac/e/
Narrow pitch connectors P8 (0.8mm pitch)
–5–
ACCTB25E 201310-T
SPECIFICATIONS
1. Characteristics
2. Material and surface treatment
Item Specifications Conditions
Electrical
characteristics
Rated current 0.5A
Rated voltage 60V AC/DC
Breakdown voltage 250V AC for 1 minute Detection current: 1mA
Insulation resistance Min. 1,000MΩ Using 500V DC megger
Contact resistance Max. 60mΩ
Based on the contact resistance measurement
method specified by JIS C 5402.
Mechanical
characteristics
Composite insertion force Max. 43.1N (30 pin contacts)
Composite removal force Min. 6.37N (30 pin contacts)
Contact holding force
40 pin contacts or less: Min. 1.96N
50 pin contacts or more: Min. 0.981N
Measuring the maximum force.
As the contact & post is axially pull out.
Environmental
characteristics
Ambient temperature –55°C to +85°C No freezing at low temperatures
Soldering heat resistance
Max. peak temperature of 245°C (on the surface of the PC board
around the connector terminals)
Infrared reflow soldering
300°C within 5 seconds Soldering iron
Storage temperature
–55°C to +85°C (product only)
–40°C to +50°C (standard packing)
No freezing at low temperatures.
No dew condensation.
Thermal shock resistance
(header and socket mated)
5 cycles, insulation resistance min. 100MΩ,
contact resistance max. 60mΩ
Conformed to MIL-STD-202F, method 107G
Humidity resistance
(header and socket mated)
120 hours, insulation resistance min. 100MΩ,
contact resistance max. 60mΩ
Bath temperature 40±2°C,
humidity 90 to 95% R.H.
Saltwater spray resistance
(header and socket mated)
24 hours, insulation resistance min. 100MΩ,
contact resistance max. 60mΩ
Bath temperature 35±2°C,
saltwarter concentration 5±1%
H2S resistance
(header and socket mated)
48 hours, contact resistance max. 60mΩ
Bath temperature 40±2°C,
gas concentration 3±1 ppm,
humidity 75 to 80% R.H.
SO2 resistance
(header and socket mated)
48 hours, contact resistance max. 60mΩ
Bath temperature 40±2°C,
gas concentration 10±3 ppm,
humidity 90 to 95% R.H.
Lifetime
characteristics
Insertion and removal life 50 times
Repeated insertion and removal speed of
max. 200 times/hours
Unit weight
Mated height 3mm 30 pin contacts; Socket: 0.26g Header: 0.26g
50 pin contacts; Socket: 0.40g Header: 0.44g
Part name Material Surface treatment
Molded portion Heat-resistant resin (UL94V-0) —
Contact/Post Copper alloy
Contact portion: Ni plating on base, Au plating on surface
Te r minal portion: Ni plating on base, Au plating on surface (Except for thick of terminal)
Order Temperature (°C) Time (minutes)
1
2
3
4
–55
85
–55
0
−3
30
Max. 5
30
Max. 5
+3
0
0
−3