(1/2)
002-03 / 20061022 / e9616_mem_t_s1.fm
• All specifications are subject to change without notice.
3-terminal Filters(SMD)
For Signal Line
MEM Series MEM2012T-S1 Type
FEATURES
• Multilayer chip EMC filter utilizing a T-type circuit.
• Entirely monolithic structure results in high reliability.
• Due to closed magnetic circuit architecture, high-density installa-
tion becomes possible, and crosstalk generation is prevented.
• Steep attenuation characteristic plot. Highly effective noise sup-
pression.
• Covers a wide range of frequencies.
• MEM2012T is a coil type EMC filter.
• This product is low profile type with the height of 0.85mm.
APPLICATIONS
Computer and computer peripherals, VCRs, TVs, car audio equip-
ment, printers, game machines, etc.
TEMPERATURE RANGES
PRODUCT IDENTIFICATION
(1)Series name
(2)Dimensions L× W
(3)T-type circuit
(4)Cutoff freguency 25R0: 25MHz
(5)Packaging style T:Taping
PACKAGING STYLE AND QUANTITIES
SHAPES AND DIMENSIONS/RECOMMENDED PC BOARD PATTERN
ELECTRICAL CHARACTERISTICS
Conformity to RoHS Directive
Operating/Storage –40 to +85°C
MEM 2012 T 25R0 T
(1) (2) (3) (4) (5)
Packaging style Quantity
Taping 4000 pieces/reel
Part No.
Cutoff frequency
(MHz)
Insertion loss
(dB)min.
Rated voltage
Edc(V)max.
Rated current
(mA)max.
MEM2012T25R0T0S1 25 30[70MHz to 2GHz] 10 100
MEM2012T35R0T0S1 35 30[90MHz to 2GHz] 10 100
MEM2012T50R0T0S1 50 30[200MHz to 2GHz] 10 100
MEM2012T101RT0S1 100 30[400MHz to 2GHz] 10 250
MEM2012T201RT0S1 200 30[530MHz to 2.5GHz] 10 250
Dimensions in mm
1.5
0.8
0.7
0.2 0.2
0.7
0.8
1.5
11
0.5 0.5
Marking
2±0.2
GND
4
0.1min.
1
IN/OUT
2
GND
3
OUT/IN
1.25±0.2
0.4±0.150.4±0.150.4±0.15
0.2min
0.2min
0.85±0.15
• Please contact our Sales office when your application are considered the following:
The device’s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.)
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.