SPEC NO: DSAJ8918 REV NO: V.7B DATE: DEC/23/2015 PAGE: 2 OF 5
APPROVED: Wynec CHECKED: Joe Lee DRAWN: L.Q.Xie ERP: 1352000563
Selection Guide
Notes:
1. Luminous intensity / luminous Flux: +/-15%.
2. Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1. Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to the CIE127-2007 compliant national standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Emitting Color (Material) Lens Type
Iv (ucd) [1]
@ 10mA
Min. Typ.
ACDA56-41QBWA/D-
F01
Blue (InGaN) White Diffused 5600 15000
Common Anode, Rt.
Hand Decimal.
Description
Symbol Parameter Emitting Color Typ. Max. Units Test Conditions
λpeak Peak Wavelength Blue 460 nm I
F=10mA
λD [1] Dominant Wavelength Blue 465 nm I
F=10mA
Δλ1/2 Spectral Line Half-width Blue 25 nm I
F=10mA
C Capacitance Blue 100 pF V
F=0V;f=1MHz
V
F [2] Forward Voltage Blue 3.0 4.0 V IF=10mA
I
R Reverse Current Blue 50 uA VR=5V
Parameter Values Units
Power dissipation 120 mW
DC Forward Current 30 mA
Peak Forward Current [1] 150 mA
Reverse Voltage 5 V
Operating / Storage Temperature -40°C To +85°C
Electrostatic Discharge Threshold (HBM) 250 V