SACC-DSI-M12FS-8CON-PG9/0,5 VA Order No.: 1554720
http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=1554720
PHOENIX CONTACT Inc., USA Page 2 / 4
http://www.phoenixcon.com Jan 18, 2011
Insulation resistance ≥ 100 MΩ
Length of cable 0.5 m
Ambient temperature (operation) -25 °C ... 85 °C (Male connector / female connector)
General characteristics
Standards/regulations M12 connector IEC 61076-2-101
Coding A - standard
Surge voltage category II
Pollution degree 3
Degree of protection IP67/IP69K
Contact material CuZn
Contact surface material Au
Contact carrier material PA 66
Material, knurls High-grade steel
Sealing material NBR
Type of connection Individual wires
Status display No
Conductor data
Cable type TPE litz wire
Conductor cross section 0.25 mm²
AWG signal line 24
Conductor structure signal line 14x 0.15 mm
Core diameter including insulation 1.15 mm ±0.07 mm
Thickness, insulation 0.21 mm
Wire colors Brown, blue, white, gray, pink, green, yellow, red
Insulation resistance ≥ 20 MΩ*km
Conductor resistance ≤ 80 Ω/km
Nominal voltage, conductor 300 V
Test voltage, conductor 2000 V AC
Material conductor insulation TPE
Conductor material Tin-plated Cu litz wires
Ambient temperature (operation) -25 °C ... 90 °C (cable, fixed installation)