SPECIFICATION CONTROL DRAWING
THERMOFIT
DEVICES
Raychem Corporation
300 Constitution Drive
Menlo Park, CA 94025
USA
TITLE:
SOLDERSLEEVE*
SHIELD TERMINATOR
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE IN BETWEEN BRACKETS.
DOCUMENT NO.:
D-142-6X
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
Raychem reserves the right to amend this
drawing at any time. Users should
evaluate the suitability of the product for
their application.
DCR NUMBER:
D981311
REPLACES:
D961394
DRAWN BY:
R. MAPALO
DATE:
07/14/98
REV.:
SEE TABLE
DOC ISSUE:
2
SCALE:
NONE
SIZE:
A
SHEET:
1 of 1
If this document is printed it becomes uncontrolled. Check for the latest revision
Product Revisions Product Dimensions Cable Dimensions
Part Name A
min
B
min
L
max
D
max
E
min
J±1.3
(.05)
D-142-65 F 10.80
(.425)
11.65
(.460)
29.75 11.4
(.450)
5.7
(.225)
9.4
D-142-66 D 13.35
(.525)
13.84
(.545)
(1.170) 13.6
(.535)
8.9
(.350)
(.370)
MATERIAL
1. INSULATION SLEEVE: Heat-shrinkable, radiation cross-linked modified polyvinylidene fluoride. Natural.
2. SOLDER PREFORM WITH FLUX:
SOLDER: TYPE Cd18 per ANSI J-STD-006.
FLUX: TYPE ROL1 per ANSI J-STD-004.
3. MELTABLE SEALING RING: Thermally stabilized thermoplastic. Color: blue.
4. MELTABLE SEALING RING: Thermally stabilized thermoplastic. Color: Natural.
APPLICATION
1. These parts are designed to provide an environment protected shield termination on cables, rated for 105°C minimum, meeting
the dimensional criteria listed and having tin or silver plated shields.
2. Temperature range: -55°C to +125°C.
3. Install using Raychem-approved convection or infrared tools in accordance with Raychem assembly procedure RCPS-100-70.
4. Assemblies will meet requirements of Raychem specification RT-1404 and National Aerospace Standard NAS-1747.
For best results, prepare the cable as shown:
*A trademark of Raychem Corporation.
