Data brief
For further information contact your local STMicroelectronics sales office.
October 2009 Doc ID 16584 Rev 1 1/4
4
STEVAL-MKI032V1
Interconnection board for connecting
STM32xxx and MEMS demonstration boards
Features
■ Integrates standard STM32 evaluation boards
and MEMS adapter boards
■ Compatible with the following demonstration
boards:
– STM3210B-EVAL - ST demonstration
board implementing the complete range of
peripherals and features for the
STM32F10xxB (128 Kbytes) medium-
density devices
– STM3210E-EVAL - ST demonstration
board implementing the complete range of
peripherals and features for the
STM32F10xxE (512 Kbytes) high-density
devices
– IAR KickStart Kit™ for STM32 (STM3210B-
SK/IAR) - full-featured demonstration board
with STM32F103B microcontroller,
standalone J-Link debugger/programmer,
IAR Embedded Workbench
®
for ARM
(EWARM) development environment, IAR
C/C++ compiler
■ Compatible with all STEVAL-MKI0xxVx MEMS
accelerometer demonstration boards suitable
for DIL24 sockets. Recommended boards are:
– digital MEMS accelerometers: STEVAL-
MKI013V1 (LIS302DL), STEVAL-
MKI009V1 (LIS3LV02DL)
– analog MEMS accelerometers: STEVAL-
MKI015V1 (LIS344ALH), STEVAL-
MKI018V1 (LIS244AL), STEVAL-
MKI020V1 (LIS302SG)
■ STM32-MEMS development kit firmware
package for STM32 included:
– MEMS library: set of functions, data
structures and constants used to manage a
MEMS sensor with examples of usage of
the MEMS library
– Demonstration applications that utilize the
MEMS library showing how to acquire data
from a sensor and send them to a PC over
USB or how to display the data using an
LCD; several demonstration applications
show utilization of interrupts generated by
digital MEMS
– Application hints on inclination
measurements
■ Remote connection option
■ RoHS compliant
Description
The purpose of the STEVAL-MKI032V1
interconnection board is to connect the data and
control signals of a MEMS sensor to pins of a
STM32xxx microcontroller.
The interconnection board has a DIL24 socket to
connect any STEVAL-MKI0xxVx MEMS
demonstration board compatible with the socket.
The system is designed to offer full control over
the MEMS sensor. For analog sensors, all axes,
power-down and full-scale signals are available.
For digital sensors, both SPI and I
2
C interfaces
are usable, as well as the interrupt lines.
To run the system, the board must be connected
on one side to an STM32xxx demonstration
board, and on the other side to a MEMS
demonstration board.
STEVAL-MKI032V1
www.st.com
