SENSOR SOLUTIONS /// DOG1 MEMS SERIES VOLTAGE INCLINOMETER 03/2017
Page 1
FEATURES
•
8-30 VDC supply voltage
•
Up to ±90 degree tolerance on
2nd axis
•
Digital signal processing includes
o filter (e.g. vibration
damping)
o temperature
compensation
•
12 bit resolution
•
100 Hz refresh rate
•
-40 °C to 85 °C temperature
range
•
Accuracy typically
o
0.5° | - 40 °C to 85 °C
o
0.15° | 25 °C
APPLICATIONS
•
Mobile and stationary cranes
•
Lift platforms
•
Building control
•
Weighing systems
•
Truck chassis levelling
•
Vehicle applications
•
Road construction machines
DOG1 MEMS SERIES
VOLTAGE INCLINOMETER
SPECIFICATIONS
• Single axis inclinometer
• Measurement range ±180°
• Voltage output
The DOG1 MEMS-Series inclinometer single axis is
mainly developed with focus on platform leveling,
dynamic engine management, tip-over protection and
tilt alarm.
A fast response time and good accuracy makes this
device the ideal choice for mobile leveling
applications. It features digital signal processing
including temperature compensation.
The integrated filter improves performance and allows
using the sensor in many noisy environments (e.g.
vibrations).
The inclinometer includes a powerful digital signal
processing that offers various filteralgorithms and
allows customer specific OEM solutions. It is possible
to adjust the sensor to different environments yielding
an optimized performance. Customization can also be
made in terms of angular range and connectivity,
i.e. cable and connector.
The PA6.6 housing is very compact in size and has
compression limiter bushings for safe installation of
the sensor. It is compatible with oil, grease and fuel
also. Therefore it is frequently used for engine and
vehicle applications.
