Technical Note
2/10
www.rohm.com
2011.06 - Rev.B
© 2011 ROHM Co., Ltd. All rights reserved.
BD1604MUV, BD1604MVV
●Electrical Characteristics
Unless otherwise specified, Ta is 25℃ and VBAT is 3.6V.
Parameter Symbol
Limits
Unit Condition
Min. Typ. Max.
[Circuit current]
Circuit current 0 IQ0 - 0.1 1 μA EN=0V
Circuit current 1.0 IQ1.0 - 1.0 2.0 mA x1.0 Mode, Iout = 0mA
Circuit current 1.5 IQ1.5 - 2.3 3.3 mA x1.5 Mode, Iout = 0mA
Circuit current 2.0 IQ2.0 - 2.5 3.5 mA X2.0 Mode, Iout = 0mA
Unless otherwise specified, Ta is 25℃ and VBAT is 3.6V.
Parameter Symbol
Limits
Unit Condition
Min. Typ. Max.
[Current driver]
LED maximum current ILEDmax - - 30 mA
LED current accuracy ILEDdiff - 0.5 5.0 % ILED=10mA
LED current matching ILEDmatch - 0.5 3.0 % ILED=10mA *1)
LED pin control voltage VLED 0.08 0.10 0.20 V
Minimum voltage
at LED1~LED4 pins
ISET voltage ISET 0.5 0.6 0.7 V
Oscillation frequency Fosc 0.8 1.0 1.2 MHz
Over current limiter IOV - 600 900 mA
LED current limiter ILEDOV 40 60 100 mA
*1) LED current matching = (ILEDmax-ILEDmin)/(ILEDmax+ILEDmin)*100
ILEDmax : Maximum value of LED1-4 current
ILEDmin : Minimum value of LED1-4 current
Unless otherwise specified, Ta is 25℃ and VBAT is 5.5V.
Parameter Symbol
Limits
Unit Condition
Min. Typ. Max.
[Control Signal etc.]
Input ’H’ voltage VIH 1.4 - - V EN,SEL0,SEL1,SEL2
Input ’L’ voltage VIL - - 0.4 V EN,SEL0,SEL1,SEL2
Input ‘H’ current1 IIH1 - 18.3 30 μA EN=5.5V
Input ‘H’ current2 IIH2 - 0 1 μA SEL0,SEL1,SEL2=5.5V
Input ‘L’ current IIL -1 0 - μA EN,SEL0,SEL1,SEL2=0V
Unless otherwise specified, Ta is 25℃ and VBAT is 3.6V.
Parameter Symbol
Limits
Unit Condition
Min. Typ. Max.
[Control Signal etc.]
UVLO detecting voltage VUVLO 1.9 2.2 2.5 V