MCP111/112
DS20001889F-page 2 2004-2016 Microchip Technology Inc.
1.0 ELECTRICAL
CHARACTERISTICS
Absolute Maximum Ratings†
V
DD
...................................................................................7.0V
Input current (V
DD
) .......................................................10 mA
Output current (RST
) ....................................................10 mA
Rated Rise Time of V
DD
.............................................100V/µs
All inputs and outputs (except RST
) w.r.t. V
SS
..............................................................-0.6V to (V
DD
+ 1.0V)
RST
output w.r.t. V
SS
.......................................-0.6V to 13.5V
Storage temperature .....................................65°C to + 150°C
Ambient temp. with power applied ...............-40°C to + 125°C
Maximum Junction temp. with power applied ...............150°C
ESD protection on all pins2kV
† Notice: Stresses above those listed under “Maximum
Ratings” may cause permanent damage to the device. This is
a stress rating only and functional operation of the device at
those or any other conditions above those indicated in the
operational listings of this specification is not implied.
Exposure to maximum rating conditions for extended periods
may affect device reliability.
DC CHARACTERISTICS
Electrical Specifications: Unless otherwise indicated, all limits are specified for V
DD
= 1V to 5.5V, R
PU
= 100 k (only MCP111),
T
A
= -40°C to +125°C.
Parameters Symbol Min. Typ. Max. Units Conditions
Operating Voltage Range V
DD
1.0 — 5.5 V
Specified V
DD
Value to V
OUT
low V
DD
1.0 — V I
RST
= 10 µA, V
RST
< 0.2V
Operating Current I
DD
— < 1 1.75 µA
V
DD
Trip Point MCP1XX-195 V
TRIP
1.872 1.900 1.929 V T
A
= +25°C (Note 1)
1.853 1.900 1.948 V T
A
= -40°C to +85°C (Note 2)
MCP1XX-240 2.285 2.320 2.355 V T
A
= +25°C (Note 1)
2.262 2.320 2.378 V Note 2
MCP1XX-270 2.591 2.630 2.670 V T
A
= +25°C (Note 1)
2.564 2.630 2.696 V Note 2
MCP1XX-290 2.857 2.900 2.944 V T
A
= +25°C (Note 1)
2.828 2.900 2.973 V Note 2
MCP1XX-300 2.886 2.930 2.974 V T
A
= +25°C (Note 1)
2.857 2.930 3.003 V Note 2
MCP1XX-315 3.034 3.080 3.126 V T
A
= +25°C (Note 1)
3.003 3.080 3.157 V Note 2
MCP1XX-450 4.314 4.380 4.446 V T
A
= +25°C (Note 1)
4.271 4.380 4.490 V Note 2
MCP1XX-475 4.561 4.630 4.700 V T
A
= +25°C (Note 1)
4.514 4.630 4.746 V Note 2
V
DD
Trip Point Tempco T
TPCO
— ±100 — ppm/°
C
Note 1: Trip point is ±1.5% from typical value.
2: Trip point is ±2.5% from typical value.
3: This specification allows this device to be used in PIC
®
microcontroller applications that require the In-Circuit Serial
Programming™ (ICSP™) feature (see device-specific programming specifications for voltage requirements). This
specification DOES NOT allow a continuous high voltage to be present on the open-drain output pin (V
OUT
). The total
time that the V
OUT
pin can be above the maximum device operational voltage (5.5V) is 100 sec. Current into the V
OUT
pin should be limited to 2 mA. It is recommended that the device operational temperature be maintained between 0°C
to 70°C (+25°C preferred). For additional information, please refer to Figure 2-28.
4: This parameter is established by characterization and is not 100% tested.