Efficiency vs. Load (48V Input)
Setpoint Accuracy ±1%
Line Regulation Vin Min. - Vin Max., Iout Rated 0.2%
Vout
Load Regulation Iout Min. - Iout Max., Vin Nom. 0.5% Vout
Minimum Output Current 10% Iout Rated
Dynamic Regulation, Loadstep 25% Iout
Pk Deviation 2% Vout
Settling Time 500 ms
Voltage Trim Range ±10%
Short Circuit / Overcurrent Protection Shutdown / Hiccup
Current Limit Threshold Range, % of Iout Rated 110 - 150%
Short Circuit Current Max. 200% Iout
(12Vout & 15Vout : 4.0A when Vout= 0.25V)
Ovp Trip Range 115 -140% Vout Nom.
Ovp Type Second Control Loop
• RoHS lead-solder
exemption compliant
• Industry-standard package
• Industry-standard pinout
• 100 °C case operation
• Short-circuit protection
• 24 V and 48 V inputs
• Input Pi filter and
6-sided shielding
• Regulated outputs
• 1500 V isolation
Description
Features
Efficiency vs. Load (24V Input)
Voltage Range
24 VDC Nominal 18 - 36 VDC
48 VDC Nominal 36 - 75 VDC
Reflected Ripple 50 mA
Input
Output
General
Turn-On Time 10 ms
Remote Shutdown Positive/Negative Logic
Switching Frequency 400 kHz
Isolation
Input - Output 1500 VD C
Output - Case 500 VD C
Temperature Coefficient 0.02 ppm/ C
Case Temperature
Operating Range -40 T o +100 C
S torage Range -40 T o +100 C
Humidity Max., Non-Condensing 9 5 %
V ibration, 3 A x e s , 5 M i n Each 5 g, 10 - 55 Hz
M T B F (Bellcore T R-NWT-000332) 2.5 X 10
6
hrs
Safety UL, cUL, T U V
Notes
† MTBF predictions may vary slightly from model to model.
Specifications typically at 25 °C, normal line, and full load,
unless otherwise stated.
Soldering Conditions: I/O pins, 260 °C, ten seconds; fully
compatible with commercial wave-soldering equipment.
Safety: Agency approvals may vary from model to model.
Please consult factory for specific model information.
Units are water-washable and fully compatible with commercial
spray or immersion post wave-solder washing equipment.
LES DC-DC converters provide up to 15 watts of output
power in an industry-standard package and footprint. With
a maximum case temperature of 100 °C, the LES is well
suited for the most demanding telecom, networking, and
industrial applications. The LES features 1500 VDC
isolation, short circuit protection, and six-sided shielding.
The LES is available with optional enable and voltage trim
pins. Please see the IAD Series for dual output
applications.
Technical Specifications
LES DC-DC Series Data Sheet
Single-Output, 15 Watts
MCD10042 Rev. 1.0, 06-Feb-08 Page 1 of 2 www.power-one.com