LQW15CN2R2M10D Datasheet LQW15CN1R0M10D, LQW15CNR56J10D, LQW15CNR47J10D | P4-P6

SpecNo.JELF243A-0096I-01 P.4/11

MURATA MFG.CO.,LTD

Reference Only

7.Mechanical Performance

No. Item Specification Test Method

7.1

Shear Test

Chip coil shall not be damaged

after tested as test method.

Substrate:Glass-epoxy substrate

(in mm)

Applied Direction:

Force:4N

Hold Duration:10s±1s

7.2 Bending Test Substrate:Glass-epoxy substrate

(100mm×40mm×0.8mm)

Speed of Applying Force:1mm / s

Deflection:2mm

Hold Duration:5s

7.3 Vibration Chip coil shall not be damaged

after tested as test method.

Oscillation Frequency : 10 to 2000 to 10Hz

for 15 minutes.

Total amplitude: 3 mm or Acceleration

amplitude 196m/s

whichever is smaller.

Time : A period of 2 hours in each of

3 mutually perpendicular directions.

(Total 6hours)

7.4 Solderability The wetting area of the electrode

shall be at least 90% covered with

new solder coating.

Flux:Ethanol solution of rosin,25(wt)%

Includes activator equivalent to 0.06(wt)%

chlorine.(immersed for 5s to 10s)

Solder:Sn-3.0Ag-0.5Cu

Pre-Heating:150°C±10°C / 60s to 90s

Solder Temperature:240°C±5℃

Immersion Time:3s±1s

7.5 Resistance to

Soldering Heat

Appearance:No damage

Inductance Change: within ±5%

Flux:Ethanol solution of rosin,25(wt)%

Includes activator equivalent to 0.06(wt)%

chlorine.(immersed for 5s to 10s)

Solder:Sn-3.0Ag-0.5Cu

Pre-Heating:150°C±10°C / 60s to 90s

Then measured after exposure in the room

condition for 24h±2h.

(20nH～560nH)

Solder Temperature:270°C±5°C

Immersion Time:10s±1s

(680nH～3300nH)

Solder Temperature:260°C±5°C

Immersion Time:5s±1s

Substrate

Chip Coil

0.4

0.5

1.4

0.66

Chi

Coil

Pattern

Solder resist

Substrate

R230

Deflection

Product

Pressure jig

(in mm)

SpecNo.JELF243A-0096I-01 P.5/11

MURATA MFG.CO.,LTD

Reference Only

8.Environmental Performance

It shall be soldered on the substrate.

No. Item Specification Test Method

8.1 Heat Resistance Appearance:No damage

Inductance Change: within ±5%

Temperature:125°C±2°C

Time:1000h (+48h,0h)

Then measured after exposure in the room

condition for 24h±2h.

8.2 Cold Resistance Temperature:-55°C±2°C

Time:1000h (+48h,-0h)

Then measured after exposure in the room

condition for 24h±2h.

8.3 Humidity Temperature:85°C±2°C

Humidity:80%(RH) to 85%(RH)

Time:1000h (+48h,-0h)

Then measured after exposure in the room

condition for 24h±2h.

8.4 Temperature

Cycle

1 cycle:

1 step:-55°C±2°C / 30min±3 min

2 step:Ordinary temp. / 10min to 15 min

3 step:+125°C±2°C / 30min±3 min

4 step:Ordinary temp. / 10min to15 min

Total of 100 cycles

Then measured after exposure in the room

condition for 24h±2h.

9.Specification of Packaging

9.1 Appearance and Dimensions of paper tape (8mm-wide, 2mm pitch)

9.2 Specification of Taping

(1) Packing quantity (standard quantity)

10,000 pcs. / reel

(2) Packing Method

Products shall be packed in the cavity of the base tape and sealed by Cover tape.

(3) Sprocket hole

The sprocket holes are to the right as the tape is pulled toward the user.

(4) Spliced point

Base tape and Cover tape has no spliced point.

(5) Missing components number

Missing components number within 0.1% of the number per reel or 1 pc., whichever is greater,

and are not continuous. The Specified quantity per reel is kept.

9.3 Pull Strength

Cover tape 5N min.

9.4 Peeling off force of cover tape

Speed of Peeling off 300mm/min

Peeling off force

0.1N to 0.6N

(minimum value is typical)

(in mm)

1.18±0.03

2.0±0.05

4.0±0.1

φ1.5±

3.5±0.05

8.0±0.2

0.8 max

0.1

1.75±0.1

Direction of feed

Cover tape

Base tape

165

to 180

゜

0.69±0.03

SpecNo.JELF243A-0096I-01 P.6/11

MURATA MFG.CO.,LTD

Reference Only

9.5 Dimensions of Leader-tape,Trailer and Reel

There shall be leader-tape ( cover tape and empty tape) and trailer-tape (empty tape) as follows.

(in mm)

9.6 Marking for reel

Customer part number, MURATA part number, Inspection number(∗1) ,RoHS Marking(∗2),

Quantity etc ･･･

∗1) <Expression of Inspection No.> □□ OOOO ×××

(1) (2) (3)

(1) Factory code

(2) Date First digit : Year / Last digit of year

Second digit : Month / Jan. to Sep. → 1 to 9, Oct. to Dec. → O, N, D

Third, Fourth digit : Day

(3) Serial No.

∗2) <Expression of RoHS Marking > ROHS – Y (△)

(1) (2)

(1)

RoHS regulation conformity parts.

(2) MURATA classification number

9.7 Marking for Outside package (corrugated paper box)

Customer name, Purchasing order number, Customer part number, MURATA part number,

RoHS Marking (∗2) ,Quantity, etc ･･･

9.8. Specification of Outer Case

Outer Case Dimensions

(mm)

Standard Reel Quantity

in Outer Case (Reel)

W D H

186 186 93 5

∗ Above Outer Case size is typical. It depends on a quantity of an order.

10. ！ Caution

Limitation of Applications

Please contact us before using our products for the applications listed below which require especially

high reliability for the prevention of defects which might directly cause damage to the third party's life,

body or property.

(1) Aircraft equipment (6) Transportation equipment (vehicles, trains, ships, etc.)

(2) Aerospace equipment

(7) Traffic signal equipment

(3) Undersea equipment

(8) Disaster prevention / crime prevention equipment

(4) Power plant control equipment (9) Data-processing equipment

(5) Medical equipment

(10) Applications of similar complexity and /or reliability

requirements to the applications listed in the above

Label

Empty tape

190 min.

Leader

Trailer

2.0±0.5

13.0±0.2

21.0±0.8

180

9.0

13.0±1.4

-3

Direction of feed

210 min.

160 min.

Cover tape

-0

Label

P1-P3 P4-P6 P7-P9 P10-P11

LQW15CN2R2M10D

Mfr. #:

Buy LQW15CN2R2M10D

Manufacturer:

Murata Electronics

Description:

Fixed Inductors 0402 2.2uH 130mA 20% 3.65ohms 80MHz

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

LQW15CN2R2M10D

LQW15CN2R2M10D

Products related to this Datasheet