Singlemode can support 40GBASE-PLR4/100GBASE-PSM4 in applicable parallel optics networks
●
MTP/MPO (APC) to 8xLC (UPC) Singlemode
Breakout Patch Cable, 40/100 GbE, QSFP+
40GBASE-PLR4, Plenum, Yellow, 5 m (16 ft.)
MODEL NUMBER: N390-05M-8LC-AP
Premium 8.3/125 singlemode fiber optic cabling for transmitting 40/100 Gb data and voice signals.
Designed for high-density fiber patching between data center MDFs and IDFs in enterprise installations.
Description
The N390-05M-8LC-AP MTP/MPO to 8xLC Singlemode Breakout Patch Cable supports 40/100 Gb
Ethernet speeds and is designed for high-density fiber patching between data center MDFs (main
distribution frames) and IDFs (intermediate distribution frames) in enterprise installations. It’s optimized for
QSFP+ 40GBASE-PLR4 and QSFP28 100GBASE-PSM4 networks. Its plenum-rated jacket makes it ideal
for connecting switches, hubs, routers and other high-speed network components in ceilings, walls and
ducts.
The 12-fiber MTP/MPO connector is about the same size as an SC connector, but is 12 times denser,
freeing up rack space for other cables. The APC connector is angled to prevent infrared light entering the
fiber from bouncing back into the laser. The N390-05M-8LC-AP is tested for low insertion loss and back
reflection on every connector and attenuation loss that meets or exceeds current standards.
The N390-05M-8LC-AP uses eight fibers to fully transmit 40GBASE-PLR4 with four fibers transmitting at
10 Gbps in each direction. Its slim, space-saving uniboot design allows easier cable management. The LC
UPC connector’s premium-grade ceramic ferrule is designed for fast applications of 10 GbE and higher.
The singlemode cable is colored yellow for instant identification in a crowded switch or patch panel.
Push/pull tab connectors are easily accessible in high-density data center environments and make the
plug-and-play cable easy to install and remove with one hand.
Features
Highlights
Push/pull tab connectors
install/remove with one hand
●
12-fiber MTP/MPO connectors
with 12x density of SC
connectors
●
Slim space-saving uniboot
design for easy cable
management
●
Angled APC connectors protect
laser against destabilization
●
Yellow color for quick
singlemode identification
●
Package Includes
N390-05M-8LC-AP MTP/MPO
to 8xLC Singlemode Breakout
Patch Cable, Yellow, 5 m
●
1 / 3
