TA7291P/S/SG/F/FG
2007-06-13
10
APPLICATION CIRCUIT
Note 1: Experiment to find the optimum capacitor valve.
Note 2: To protect against excess current, current limitation resistor R should be inserted where necessary.
NOTES
z Be careful when switching the input because rush current may occur.
When switching, stop mode should be entered or current limitation resister R should be inserted.
z The IC functions cannot be guaranteed when turning power on of off.
Before using the IC for application, check that there are no problems.
z Utmost care is necessary in the design of the output, V
CC
, V
M
, and GND lines since the IC may be destroyed by
short-circuiting between outputs, air contamination faults, or faults due to improper grounding, or by
short-circuiting between contiguous pins.
TA7291P /TA7291S/SG /TA7291F/FG
TA7291P /S/SG /F/FG
