MT88L89 Data Sheet
20
Zarlink Semiconductor Inc.
‡ Typical figures are at 25C and for design aid only: not guaranteed and not subject to production testing.
† Characteristics are over recommended operating conditions unless otherwise stated.
‡ Typical figures are at 25C, V
DD
= 3 V, and for design aid only: not guaranteed and not subject to production testing.
* *See “Notes” following AC Electrical Characteristics Tables.
† Characteristics are over recommended operating conditions unless otherwise stated
‡ Typical figures are at 25C, V
DD
= 3 V, and for design aid only: not guaranteed and not subject to production testing
11 Common mode range V
CM
1.5 V
pp
V
DD
= 3 V, No Load
Note 9
MT88L89 AC Electrical Characteristics
†
- Voltages are with respect to ground (V
SS
) unless otherwise stated.
Characteristics Sym. Min. Typ.
‡
Max. Units Notes*
1
R
X
Valid input signal levels
(each tone of composite
signal)
-29 -4 dBm 1,2,3,5,6,13
27.5 489 mV
RMS
1,2,3,5,6
2
R
X
Positive twist accept 8 dB 2,3,6,9
3 Negative twist accept 8 dB 2,3,6,9
4 Freq. deviation accept 1.5% 2Hz 2,3,5
5 Freq. deviation reject 3.5% 2,3,5
6 Third tone tolerance -16 dB 2,3,4,5,9,10
7 Noise tolerance -12 dB 2,3,4,5,7,9,10
8 Dial tone tolerance 22 dB 2,3,4,5,8,9
AC Electrical Characteristics
†
- Call Progress - Voltages are with respect to ground (V
SS
), unless otherwise stated.
Characteristics Sym. Min. Typ.
‡
Max. Units Conditions
1 Accept Bandwidth f
A
320 500 Hz @ -25 dBm
Note 9
2 Lower freq. (REJECT) f
LR
290 Hz @ -25 dBm
Note 9
3 Upper freq. (REJECT) f
HR
540 Hz @ -25 dBm
Note 9
4 Call progress tone detect level (total
power)
-30 dBm
Electrical Characteristics
Gain Setting Amplifier
- Voltages are with respect to ground (V
SS
) unless otherwise stated, V
SS
= 0 V, V
DD
= 3 V, T
O
= 25C.
Characteristics Sym. Min. Typ.
‡
Max. Units Test Conditions