EAW0J-B24-CE0128L

Features
Absolute encoder / absolute code output
Digital output
Sturdy construction
Bushing mount
Available with PC board mounting bracket (optional)
*RoHS compliant
EAW - Absolute Contacting Encoder (ACE
)
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
Specifi cations are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specifi c applications.
Electrical Characteristics
Output ...............................................................................................................................................................................8-bit code with 128 absolute states
Closed Circuit Resistance ...........................................................................................................................................................................5 ohms maximum
Open Circuit Resistance ....................................................................................................................................................................... 100 K ohms minimum
Contact Rating .................................................................................................................................................. 10 milliamp @ 10 VDC or 0.1 watt maximum
Insulation Resistance (500 VDC) ...................................................................................................................................................1,000 megohms minimum
Dielectric Withstanding Voltage (MIL-STD-202 Method 301)
Sea Level ............................................................................................................................................................................................ 1,000 VAC minimum
Electrical Travel .....................................................................................................................................................................................................Continuous
Contact Bounce (60 RPM)........................................................................................................................................................... 2.7 milliseconds maximum*
RPM (Operating) .............................................................................................................................................................................................. 120 maximum
Environmental Characteristics
Operating Temperature Range .......................................................................................................................................-40 ºC to +85 ºC (-40 °F to +185 °F)
Storage Temperature Range ..........................................................................................................................................-40 ºC to +85 ºC (-40 °F to +185 °F)
Humidity................................................................................................................................................................. MIL-STD-202, Method 103B, Condition B
Vibration .......................................................................................................................................................................................................................... 15 G
Contact Bounce ...........................................................................................................................................................................0.1 millisecond maximum
Shock............................................................................................................................................................................................................................... 50 G
Contact Bounce ...........................................................................................................................................................................0.1 millisecond maximum
Rotational Life.................................................................................................................................................................... 50,000 shaft revolutions minimum
IP Rating ..........................................................................................................................................................................................................................IP 40
Mechanical Characteristics
Mechanical Angle ........................................................................................................................................................................................ 360 ° Continuous
Running Torque .............................................................................................................................................................. 0.5 to 1.5 N-cm (0.75 to 2.50 oz-in.)
Mounting Torque .........................................................................................................................................................................79 N-cm (7 lb.-in.) maximum
Shaft Side Load (Static)....................................................................................................................................................................4.5 kg (10 lbs.) minimum
Weight ................................................................................................................................................................................ Approximately 14 gms. (0.50 oz.)
Terminals ................................................................................................................................................................................. Printed circuit board terminals
Soldering Condition
Manual Soldering ................................................................................................................... 96.5Sn/3.0Ag/0.5Cu solid wire or no-clean rosin cored wire
370 °C (700 °F) max. for 3 seconds
Wave Soldering ...........................................................................................................................................96.5Sn/3.0Ag/0.5Cu solder with no-clean fl ux
260 °C (500 °F) max. for 5 seconds
Wash processes .................................................................................................................................................................................... Not recommended
Marking ...........................................................................................................................Manufacturer’s name and trademark, part number, and date code.
Hardware ................................................. One lockwasher and one mounting nut are shipped with each encoder, except where noted in the part number.
Packaging ............................................................................................................................................................................................................. 45 pcs./tray
*High probability of missing quadrature codes with maximum bounce.
General Information
*RoHS COMPLIANT
Until now, the choice of an absolute
encoder meant an expensive, and larger-
sized product. Through the use of
combinatorial mathematics, the absolute
code pattern of the Bourns
®
Absolute
Contacting Encoder (ACE
) is placed on a
single track for a very economical, energy-
effi cient and compact product. Bourns
®
ACE
provides an absolute digital output
that will also retain its last position in the
event of a power failure.
An intelligent alternative to incremental
encoders and potentiometers, the Bourns
®
ACE
is ideally suited for many industrial,
automotive, medical and consumer product
applications.
Recommended Control Diagram for ACE-128
P8
1
μP
RESNET
4609X-
101-472
“common” is either
on a decoded
“select” pin
(active low)
or at GND.
ACETAB:
256 byte
code
conversion
table (ROM)
P7P6P5P4P3P2P1
2
C
3
4
8
7
C
6
5
Specifi cations are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specifi c applications.
EAW - Absolute Contacting Encoder (ACE
)
Pin Output Code For ACE-128
Bit/Pin correlation: b7 b6 b5 b4 b3 b2 b1 b0 = p8 p7 p6 p5 p4 p3 p2 p1
A binary “1” denotes an “open” switch and a binary “0” denotes a “closed” switch.
Positions 0-127 are seen by a clockwise rotation of the shaft.
Position p8 p7 p6 p5 p4 p3 p2 p1
Decimal
Output
0 0 1 1 1 1 1 1 1 127
100111111 63
200111110 62
300111010 58
400111000 56
5 1 0 1 1 1 0 0 0 184
6 1 0 0 1 1 0 0 0 152
700011000 24
800001000 8
901001000 72
10 0 1 0 0 1 0 0 1 73
11 0 1 0 0 1 1 0 1 77
12 0 1 0 0 1 1 1 1 79
13 0 0 0 0 1 1 1 1 15
14 0 0 1 0 1 1 1 1 47
15 1 0 1 0 1 1 1 1 175
16 1 0 1 1 1 1 1 1 191
17 1 0 0 1 1 1 1 1 159
18 0 0 0 1 1 1 1 1 31
19 0 0 0 1 1 1 0 1 29
20 0 0 0 1 1 1 0 0 28
21 0 1 0 1 1 1 0 0 92
22 0 1 0 0 1 1 0 0 76
23 0 0 0 0 1 1 0 0 12
24 0 0 0 0 0 1 0 0 4
25 0 0 1 0 0 1 0 0 36
26 1 0 1 0 0 1 0 0 164
27 1 0 1 0 0 1 1 0 166
28 1 0 1 0 0 1 1 1 167
29 1 0 0 0 0 1 1 1 135
30 1 0 0 1 0 1 1 1 151
31 1 1 0 1 0 1 1 1 215
32 1 1 0 1 1 1 1 1 223
33 1 1 0 0 1 1 1 1 207
34 1 0 0 0 1 1 1 1 143
35 1 0 0 0 1 1 1 0 142
36 0 0 0 0 1 1 1 0 14
37 0 0 1 0 1 1 1 0 46
38 0 0 1 0 0 1 1 0 38
39 0 0 0 0 0 1 1 0 6
40 0 0 0 0 0 0 1 0 2
41 0 0 0 1 0 0 1 0 18
42 0 1 0 1 0 0 1 0 82
43 0 1 0 1 0 0 1 1 83
44 1 1 0 1 0 0 1 1 211
45 1 1 0 0 0 0 1 1 195
46 1 1 0 0 1 0 1 1 203
47 1 1 1 0 1 0 1 1 235
48 1 1 1 0 1 1 1 1 239
49 1 1 1 0 0 1 1 1 231
50 1 1 0 0 0 1 1 1 199
51 0 1 0 0 0 1 1 1 71
52 0 0 0 0 0 1 1 1 7
53 0 0 0 1 0 1 1 1 23
54 0 0 0 1 0 0 1 1 19
55 0 0 0 0 0 0 1 1 3
56 0 0 0 0 0 0 0 1 1
57 0 0 0 0 1 0 0 1 9
58 0 0 1 0 1 0 0 1 41
59 1 0 1 0 1 0 0 1 169
60 1 1 1 0 1 0 0 1 233
61 1 1 1 0 0 0 0 1 225
62 1 1 1 0 0 1 0 1 229
63 1 1 1 1 0 1 0 1 245
Position p8 p7 p6 p5 p4 p3 p2 p1
Decimal
Output
64 1 1 1 1 0 1 1 1 247
65 1 1 1 1 0 0 1 1 243
66 1 1 1 0 0 0 1 1 227
67 1 0 1 0 0 0 1 1 163
68 1 0 0 0 0 0 1 1 131
69 1 0 0 0 1 0 1 1 139
70 1 0 0 0 1 0 0 1 137
71 1 0 0 0 0 0 0 1 129
72 1 0 0 0 0 0 0 0 128
73 1 0 0 0 0 1 0 0 132
74 1 0 0 1 0 1 0 0 148
75 1 1 0 1 0 1 0 0 212
76 1 1 1 1 0 1 0 0 244
77 1 1 1 1 0 0 0 0 240
78 1 1 1 1 0 0 1 0 242
79 1 1 1 1 1 0 1 0 250
80 1 1 1 1 1 0 1 1 251
81 1 1 1 1 1 0 0 1 249
82 1 1 1 1 0 0 0 1 241
83 1 1 0 1 0 0 0 1 209
84 1 1 0 0 0 0 0 1 193
85 1 1 0 0 0 1 0 1 197
86 1 1 0 0 0 1 0 0 196
87 1 1 0 0 0 0 0 0 192
88 0 1 0 0 0 0 0 0 64
89 0 1 0 0 0 0 1 0 66
90 0 1 0 0 1 0 1 0 74
91 0 1 1 0 1 0 1 0 106
92 0 1 1 1 1 0 1 0 122
93 0 1 1 1 1 0 0 0 120
94 0 1 1 1 1 0 0 1 121
95 0 1 1 1 1 1 0 1 125
96 1 1 1 1 1 1 0 1 253
97 1 1 1 1 1 1 0 0 252
98 1 1 1 1 1 0 0 0 248
99 1 1 1 0 1 0 0 0 232
100 1 1 1 0 0 0 0 0 224
101 1 1 1 0 0 0 1 0 226
102 0 1 1 0 0 0 1 0 98
103 0 1 1 0 0 0 0 0 96
104 0 0 1 0 0 0 0 0 32
105 0 0 1 0 0 0 0 1 33
106 0 0 1 0 0 1 0 1 37
107 0 0 1 1 0 1 0 1 53
108 0 0 1 1 1 1 0 1 61
109 0 0 1 1 1 1 0 0 60
110 1 0 1 1 1 1 0 0 188
111 1 0 1 1 1 1 1 0 190
112 1 1 1 1 1 1 1 0 254
113 0 1 1 1 1 1 1 0 126
114 0 1 1 1 1 1 0 0 124
115 0 1 1 1 0 1 0 0 116
116 0 1 1 1 0 0 0 0 112
117 0 1 1 1 0 0 0 1 113
118 0 0 1 1 0 0 0 1 49
119 0 0 1 1 0 0 0 0 48
120 0 0 0 1 0 0 0 0 16
121 1 0 0 1 0 0 0 0 144
122 1 0 0 1 0 0 1 0 146
123 1 0 0 1 1 0 1 0 154
124 1 0 0 1 1 1 1 0 158
125 0 0 0 1 1 1 1 0 30
126 0 1 0 1 1 1 1 0 94
127 0 1 0 1 1 1 1 1 95
87C65
12C34
0.51
(.020)
2.54
(.100)
0.64 ± 0.03
(.025 ± .001)
10 PLCS.
0.76
(.030)
TYP. 4 PLCS.
Bushing Mounted: Housing A with Rear Facing Terminals
PCB Bracket Mounted: Housing B
1.52
(.060)
1.02
(.040)
0.64 ± 0.03
(.025 ± .001)
10 PLCS.
2.54
(.100)
8 PLCS.
3.68 ± .38
(.145 ± .015)
9.02
(.355)
5.08
(.200)
6.32 +0.03/-0.08
(.249 +.001/-.003)
6.32 +0.03/-0.08
(.249 +.001/-.003)
8.51 ± .25
(.335 ± .010)
19.05 ± .38
(.750 ± .015)
6.35
(.250)
12.7
(.500)
1.6
(.063)
12.7
(.500)
1.6
(.063)
1.19
(.047)
1.19
(.047)
9.0
(.354)
DIA.
M9 X 0.75-6g SPL
9.0
(.354)
DIA.
M9 X 0.75-6g SPL
2.79
(.110)
13.97
(.550)
11.1
(.437)
27.94 ± .25
(1.100 ± .010)
18.54 ± .38
(.730 ± .015)
14.7 ± 0.5
(.578 ± .020)
1.19
(.047)
9.02 ± .15
(.355 ± .006)
22.2 ± .25
(.874 ± .010)
23.88
(.940)
DIA.
87C65
12C34
2.79
(.110)
13.97
(.550)
11.1
(.437)
27.94 ± .25
(1.100 ± .010)
17.07 ± .25
(.672 ± .010)
1.19
(.047)
9.02 ± .15
(.355 ± .006)
22.2 ± .25
(.874 ± .010)
23.88
(.940)
23.37 ± .25
(.920 ± .010)
Bushing Mounted: Housing A with Forward Facing Terminals
1.52
(.060)
0.64 ± 0.03
(.025 ± .001)
10 PLCS.
2.54
(.100)
8 PLCS.
2.54 ± .25
(.100 ± .010)
6.32 +0.03/-0.08
(.249 +.001/-.003)
8.51 ± .25
(.335 ± .010)
19.05 ± .38
(.750 ± .015)
6.35
(.250)
12.7
(.500)
1.6
(.063)
1.19
(.047)
9.0
(.354)
DIA.
M9 X 0.75-6g SPL
2.79
(.110)
13.97
(.550)
11.1
(.437)
27.94 ± .25
(1.100 ± .010)
14.7 ± 0.5
(.578 ± .020)
1.19
(.047)
9.02 ± .15
(.355 ± .006)
22.2 ± .25
(.874 ± .010)
23.88
(.940)
DIA.
87C65
12C34
Specifi cations are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specifi c applications.
EAW - Absolute Contacting Encoder (ACE
)
Dimensional Drawings

EAW0J-B24-CE0128L

Mfr. #:
Manufacturer:
Bourns
Description:
Encoders Digital Output Bushing Mount
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union