OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

EEU-TA1C471SB

P1-P3
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ TA
– EEE-94 –
08
0D±0.5
F±0.5
Sleeve
14 min.
3 min.
L
=
=L16 : L±1.0 (016L15, 018L15 : L±1.5)
L20 : L±2.0
Pressure relief
+
–
010
0D±0.5
fd±0.05
Radial Lead Type
Series:
TA
Type:
A
■ Di men sions in mm (not to scale)
Body Dia.
0
D81012.51618
Lead Dia.
0
d 0.6 0.6 0.6 0.8 0.8
Lead space F 3.5 5.0 5.0 7.5 7.5
■ Features
●
Endurance: 125 °C 2000 h
●
Heat cycle: 1000 cycle –40 °C to +125 °C
● AEC-Q200 qualifi ed
✽
●
RoHS directive compliant
■ Speci cations
Category Temp. Range –40 °C to + 125 °C
Rated W.V. Range 10 V .DC to 63 V .DC
Nominal Cap. Range 2.2 μF to 4700 μF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I
<
0.01 CV or 3 (μA) After 2 minutes (Whichever is greater)
tan
d
W.V.(V) 10 16 25 35 50 63
(120Hz / +20 °C)
tan
d
0.20 0.16 0.14 0.12 0.10 0.09
For capacitance value
>
1000 μF , add 0.02 per every 1000 μF.
Endurance
After following life test with DC voltage and +125 °C±2 °C ripple current value applied (The sum
of DC and ripple peak voltage shall not exceed the rated working voltage), for 2000 hours,
when the capacitors are restored to 20 °C, the capacitors, shall meet the limits specifi ed below.
Capacitance change ±30% of initial measured value
tan
d
<
300 % of initial specifi ed value
DC leakage current
<
initial specifi ed value
Shelf Life
After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
W.V.
(V.DC)
Cap. (μF)
Frequency (Hz)
60 120 1 k 10 k 100 k
10 to 63
1 to 330 0.55 0.65 0.85 0.90 1.00
470 to 1000 0.70 0.75 0.90 0.95 1.00
2200 to 4700 0.75 0.80 0.90 0.95
1.00
■ Frequency correction factor for ripple current
(Unit : mm)
✽
This product qualify for AEC-Q200, but it has some deviations.
03 Mar. 2015
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ TA
– EEE-95 –
■ Standard Prod ucts
W.V.
Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(100 kHz)
(+125 °C)
Imped-
ance
(100 kHz)
(+20 °C)
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽
B
(V) (μF) (mm) (mm)
(mA r.m.s.)
(Ω) (mm) (mm) (mm) (pcs) (pcs)
10
330 8 11.5 500 0.130 0.6 3.5 5.0 EEUTA1A331( ) 200 1000
470 10 12.5 680 0.100 0.6 5.0 5.0 EEUTA1A471( ) 200 500
1000
10 20 1100 0.057 0.6 5.0 5.0 EEUTA1A102( ) 200 500
12.5 15 1085 0.070 0.6 5.0 5.0 EEUTA1A102S( ) 200 500
2200
12.5 25 1750 0.033 0.6 5.0 5.0 EEUTA1A222L( ) 200 500
16 20 1985 0.032 0.8 7.5 7.5 EEUTA1A222( ) 100 250
18 15 1800 0.042 0.8 7.5 7.5 EEUTA1A222S( ) 100 250
3300
16 25 2300 0.024 0.8 7.5 7.5 EEUTA1A332( ) 100 250
18 20 2250 0.031 0.8 7.5 7.5 EEUTA1A332S( ) 100 250
4700
16 31.5 2710 0.020 0.8 7.5 EEUTA1A472 100
18 25 2470 0.022 0.8 7.5 7.5 EEUTA1A472S( ) 100 250
16
220 8 11.5 500 0.130 0.6 3.5 5.0 EEUTA1C221( ) 200 1000
330 10 12.5 680 0.100 0.6 5.0 5.0 EEUTA1C331( ) 200 500
470 10 16 945 0.075 0.6 5.0 5.0 EEUTA1C471( ) 200 500
1000
12.5 20 1490 0.042 0.6 5.0 5.0 EEUTA1C102( ) 200 500
16 15 1520 0.047 0.8 7.5 7.5 EEUTA1C102S( ) 100 250
2200
16 25 2300 0.024 0.8 7.5 7.5 EEUTA1C222( ) 100 250
18 20 2250 0.031 0.8 7.5 7.5 EEUTA1C222S( ) 100 250
3300
16 31.5 2710 0.020 0.8 7.5 EEUTA1C332 100
18 25 2470 0.022 0.8 7.5 7.5 EEUTA1C332S( ) 100 250
4700 18 31.5 3270 0.018 0.8 7.5 EEUTA1C472 50
25
100 8 11.5 500 0.130 0.6 3.5 5.0 EEUTA1E101( ) 200 1000
220 10 12.5 680 0.100 0.6 5.0 5.0 EEUTA1E221( ) 200 500
330 10 16 945 0.075 0.6 5.0 5.0 EEUTA1E331( ) 200 500
470
10 20 1100 0.057 0.6 5.0 5.0 EEUTA1E471( ) 200 500
12.5 15 1085 0.070 0.6 5.0 5.0 EEUTA1E471S( ) 200 500
1000
12.5 25 1750 0.033 0.6 5.0 5.0 EEUTA1E102L( ) 200 500
16 20 1985 0.032 0.8 7.5 7.5 EEUTA1E102( ) 100 250
18 15 1800 0.042 0.8 7.5 7.5 EEUTA1E102S( )
100 250
2200
16 31.5 2710 0.020 0.8 7.5 EEUTA1E222 100
18 25 2470 0.022 0.8 7.5 7.5 EEUTA1E222S( ) 100 250
3300 18 35.5 3310 0.017 0.8 7.5 EEUTA1E332 50
35
100 10 12.5 555 0.180 0.6 5.0 5.0 EEUTA1V101( ) 200 500
220 10 16 765 0.130 0.6 5.0 5.0 EEUTA1V221( ) 200 500
330 10 20 930 0.100 0.6 5.0 5.0 EEUTA1V331( ) 200 500
470
12.5 20 1330 0.070 0.6 5.0 5.0 EEUTA1V471( ) 200 500
16 15 1450 0.088 0.8 7.5 7.5 EEUTA1V471S( ) 100 250
1000
16 25 2010 0.037 0.8 7.5 7.5 EEUTA1V102( ) 100 250
18 20 2180 0.046 0.8 7.5 7.5 EEUTA1V102S( ) 100 250
2200 18 35.5 2790 0.025 0.8 7.5 EEUTA1V222 50
· When requesting taped product, please put the letter "B" be tween the "( )". Lead wire pitch
✽
B=5 mm, 7.5 mm.
· Please refer to the page of “Taping Dimensions”.
Endurance : 125 °C 2000 h
03 Mar. 2015
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ TA
– EEE-96 –
■ Standard Prod ucts
W.V.
Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(100 kHz)
(+125 °C)
Imped-
ance
(100 kHz)
(+20 °C)
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽
B
(V) (μF) (mm) (mm)
(mA r.m.s.)
(Ω) (mm) (mm) (mm) (pcs) (pcs)
50
10 8 11.5 180 0.950 0.6 3.5 5.0 EEUTA1H100( ) 200 1000
22 8 11.5 250 0.650 0.6 3.5 5.0 EEUTA1H220( ) 200 1000
33 8 11.5 300 0.450 0.6 3.5 5.0 EEUTA1H330( ) 200 1000
47 8 11.5 440 0.350 0.6 3.5 5.0 EEUTA1H470S( ) 200 1000
100 10 12.5 555 0.180 0.6 5.0 5.0 EEUTA1H101( ) 200 500
220 10 20 930 0.100 0.6 5.0 5.0 EEUTA1H221( ) 200 500
330
12.5 20 1330 0.070 0.6 5.0 5.0 EEUTA1H331( ) 200 500
16 15 1450 0.088 0.8 7.5 7.5 EEUTA1H331S( ) 100 250
470
12.5 25 1650 0.055 0.6 5.0 5.0 EEUTA1H471L( ) 200 500
16 20 1650 0.053 0.8 7.5 7.5 EEUTA1H471( ) 100 250
18 15 1710 0.075 0.8 7.5 7.5 EEUTA1H471S( ) 100 250
1000
16 31.5 2430 0.031 0.8 7.5 EEUTA1H102 100
18 25 2350 0.032 0.8 7.5 7.5 EEUTA1H102S( ) 100 250
63
22 8 11.5 310 0.470 0.6 3.5 5.0 EEUTA1J220( ) 200 1000
33 10 12.5 410 0.360 0.6 5.0 5.0 EEUTA1J330( ) 200 500
47 10 16 460 0.270 0.6 5.0 5.0 EEUTA1J470( ) 200 500
100 10 20 680 0.205 0.6 5.0 5.0 EEUTA1J101( ) 200 500
220
12.5 25 1325 0.100 0.6 5.0 5.0 EEUTA1J221L( ) 200 500
16 20 1360 0.085 0.8 7.5 7.5 EEUTA1J221( ) 100 250
18 15 1300 0.120 0.8 7.5 7.5 EEUTA1J221S( ) 100 250
330
16 25 1660 0.070 0.8 7.5 7.5 EEUTA1J331( ) 100 250
18 20 1760 0.077 0.8 7.5 7.5 EEUTA1J331S( ) 100 250
470
16 31.5 2055 0.060 0.8 7.5 EEUTA1J471 100
18 25 1990 0.060 0.8 7.5 7.5 EEUTA1J471S( ) 100 250
· When requesting taped product, please put the letter "B" be tween the "( )". Lead wire pitch
✽
B=5 mm, 7.5 mm.
· Please refer to the page of “Taping Dimensions”.
Endurance : 125 °C 2000 h
03 Mar. 2015
P1-P3

EEU-TA1C471SB

Mfr. #:
Buy EEU-TA1C471SB
Manufacturer:
Panasonic
Description:
Aluminum Electrolytic Capacitors - Radial Leaded Al Lytic Cap 125C Radial TA Series
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet