3
Part Numbering System
Device Selection Guide
Part Number
Color and Dominant
Wavelength λ
d
(nm)
Typ
[3]
Luminous Intensity Iv (mcd) at
20 mA
[1,2,5]
Stando
Typical Viewing
angle (°)
[4]
Min Max
HLMP-CB1G-WY0DD Blue 470 5500 12000 No 15
HLMP-CB1H-WY0DD Blue 470 5500 12000 Yes
HLMP-CM1G-350DD Green 525 27000 59000 No
HLMP-CM1H-350DD Green 525 27000 59000 Yes
HLMP-CB2G-UW0DD Blue 470 3200 7200 No 23
HLMP-CB2H-UW0DD Blue 470 3200 7200 Yes
HLMP-CM2G-130DD Green 525 16000 35000 No
HLMP-CM2H-130DD Green 525 16000 35000 Yes
HLMP-CB3G-TV0DD Blue 470 2500 5500 No 30
HLMP-CB3H-TV0DD Blue 470 2500 5500 Yes
HLMP-CM3G-Y10DD Green 525 9300 21000 No
HLMP-CM3H-Y10DD Green 525 9300 21000 Yes
Notes:
1. The luminous intensity is measured on the mechanical axis of the lamp package and it is tested with pulsing condition.
2. The optical axis is closely aligned with the package mechanical axis.
3. Dominant wavelength, λ
d
, is derived from the CIE Chromaticity Diagram and represents the color of the lamp.
4. θ
½
is the o-axis angle where the luminous intensity is half the on-axis intensity.
5. Tolerance for each bin limit is ± 15%
Packaging Option
DD: Ammopack
Color Bin Selection
0 : Full Distribution
Maximum Intensity Bin
Refer to Device Selection Guide
Minimum Intensity Bin
Refer to Device Selection Guide
Viewing Angle and Lead Stando
1G : 15 without stando
1H : 15 with stando
2G : 23 without stando
2H : 23 with stando
3G : 30 without stando
3H : 30 with stando
Color
B : Blue
M : Green
Package
C: 5 mm Standard Round InGaN
HLMP – C x xx – x x x xx