THIRD ANGLE PROJ.
DATEDESCRIPTIONREV
REVISIONS
ECO APPR
CAD FILE
REV
DWG SIZE
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN METRIC AND TOLERANCES ARE:
#0.1mm
#0.2mm
6 - 30mm
0.5 - 6mm
30 - 120mm
# 0.3mm
ANGLES
#1$
<0.5mm
# 0.05mm
.261 .259
.375
7/16" ACROSS FLATS
.232
.177
.175
.152
.133
.024
.090" INSULATOR AND INNER BRAID STRIPPING
.308" INNER JACKET STRIPPING
.943" OUTER BRAID STRIPPING
1.318" OUTER JACKET STRIPPING
A OFFICIAL ENG. RELEASE 6/19/86 32906 PM
B
McAIR SPEC WAS "REV. A"; ADDED CABLE ENTRY
DIMS.; ADDED NOTES 5, 6, 7, & 8
7/27/92 38907 DL
C
ADDED DATE CODE 'YYWW' TO STAMP; REMOVED NOTES 3,5;
BOEING-ST. LOUIS SPEC WAS "McAIR, REV. D"
8/2/11 48686 MJS
C
B
REFERENCE
BOEING-ST. LOUIS
5M2497 S 0 1,
REV. K
NOTICE - These drawings, specifications, or other data (1) are, and remain the
property of Amphenol corp. (2) must be returned upon request; and (3) are
confidential and not to be disclosed to any person other than those to whom they
are given by Amphenol Corp. the furnishing of these drawings, specifications, or
other data by Amphenol Corp., or to any other person to anyone for any purpose is
not to be regarded by implication or otherwise in any manner licensing, granting
rights to permitting such holder or any other person to manufacture, use or sell any
product, process or design, patented or otherwise, that may in any way be related to
or disclosed by said drawings, specifications, or other data.
SHEET 2 OF 2
SCALE: 2.8:1.06/18/86 S.P.M.
TITLE
TNC
STRAIGHT
TRIAX PLUG
DATEAPPROVED
Amphenol RF
www.amphenolrf.com
DATE
6/12/86
ENGINEER
D. ROYCE
MATERIAL DATE
4/29/86
DRAWN
P. MATULA
FINISH
DRAWING NO. 82-5773
ITEM NO. 82-5773
PART NO. 82-5773
NOTES:
1. MATERIALS AND FINISHES:
BODY - BRASS, SILVER PLATING (.000200 MIN THICK)
INNER AND OUTER CONTACT -BRASS ,GOLD PLATING (.000050 MIN THICK)
BRAID CLAMP- BRASS, SILVER PLATING (.000200 MIN THICK)
INNER FERRULE- BRASS, SILVER PLATING (.000200 MIN THICK)
OUTER FERRULE- COPPER, SILVER PLATING (.000200 MIN THICK)
CLAMP NUT- BRASS, SILVER PLATING (.000200 MIN THICK)
GASKET- SILICON RUBBER
INSULATOR - PTFE
2. ELECTRICAL:
A. IMPEDANCE: 50 OHM
B. FREQUENCY RANGE: DC - 11 GHz
C. VSWR(RETURN LOSS): 1.35 MAX.
D. DIELECTRIC WITHSTANDING VOLTAGE: 1500 VRMS, MIN.
3. MECHANICAL:
A. TEMPERATURE RANGE: -65 $ C TO 165 $ C
4. PACKAGING:
A. QUANTITY: SINGLE PACK
B. MARKING: BAG TO BE MARKED
"AMPHENOL, 82-5773 , AND DATE CODE"
7/16" HEX
CONNECTOR CONTACT BRAID CLAMP BRAID CLAMP GASKET INNER FERRULE CLAMP NUT
OUTER FERRULE HEAT SHRINK TUBERECOMMENDED STRIPPING DIMENSIONS
SCALE 1.250
