MIC5357-GFYMME-TR

MIC5357
High Performance, Low Noise Dual
500mA ULDO™
ULDO is a trademark of Micrel, Inc
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com
General Description
The MIC5357 is a tiny Dual Ultra Low Dropout (ULDO™)
linear regulator ideally suited for portable electronics due
to its low output noise. The MIC5357 provides two
independently controlled high performance 500mA LDOs
with typical dropout voltage of 130mV at rated load. In
addition, the MIC5357 provides a bypass pin to reduce the
output noise.
The MIC5357 is designed to be stable with small ceramic
output capacitors thereby reducing required board space
and component cost. The combination of extremely low
dropout voltage, low output noise and exceptional thermal
package characteristics makes it ideal for powering RF
and noise sensitive circuitry, cellular phone camera
modules, imaging sensors for digital still cameras, PDAs,
MP3 players and WebCam applications.
The MIC5357 ULDO™ is available in fixed output voltages
in the small 8-pin ePad MSOP package. Additional voltage
options are available. For more information, contact Micrel
marketing.
Data sheets and support documentation can be found on
Micrel’s web site at: www.micrel.com
.
Features
2.6V to 5.5V input voltage range
Ultra low dropout voltage: 130mV @ 500mA
Ultra low output noise: 51µV
RMS
±2% initial output accuracy
Small 8-pin ePad MSOP package
Excellent Load/Line transient response
Fast start up time: 38µs
µCap stable with 2.2µF ceramic capacitors
Thermal shutdown protection
Low quiescent current: 160µA with both outputs at
maximum load
Current-limit protection
Applications
Battery-Powered Applications
PDAs
GPS receivers
Portable electronics
Portable media players
Digital still and video cameras
_________________________________________________________________________________________________________________________
Typical Application
January 2011
M9999-011311
RF Power Supply Circuit
Micrel, Inc. MIC5357
January 2011 2
M9999-011311
Block Diagram
Micrel, Inc. MIC5357
January 2011 3
M9999-011311
Ordering Information
Voltage(V)
Part Number
(1)
Manufacturing Part
Number
Marking
V
OUT1
V
OUT2
Junction Temperature
Range
Package
MIC5357-3.3/2.8YMME MIC5357-SMYMME 57SM 3.3V 2.8V –40°C to +125°C 8-Pin ePAD MSOP
MIC5357-3.3/1.8YMME MIC5357-SGYMME 57SG 3.3V 1.8V –40°C to +125°C 8-Pin ePAD MSOP
MIC5357-2.8/1.8YMME MIC5357-MGYMME 57MG 2.8V 1.8V –40°C to +125°C 8-Pin ePAD MSOP
MIC5357-1.8/1.5YMME MIC5357-GFYMME 57GF 1.8V 1.5V –40°C to +125°C 8-Pin ePAD MSOP
Notes
1. For other voltage options contact Micrel Marketing.
Pin Configuration
8-Pin ePAD MSOP (MME)
TOP VIEW
Pin Description
Pin Number Pin Name Pin Function
1 VIN Supply Input.
2 GND Ground.
3 BYP
Reference Bypass: Connect external 0.1µF to GND to reduce output noise.
May be left open when bypass capacitor is not required.
4 EN2
Enable Input (regulator 2). Active High Input. Logic High = On; Logic Low = Off;
Do not leave floating.
5 EN1
Enable Input (regulator 1). Active High Input. Logic High = On; Logic Low = Off;
Do not leave floating.
6 NC Not internally connected.
7 VOUT2 Regulator Output – LDO2.
8 VOUT1 Regulator Output – LDO1.
ePAD HS Pad Heatsink Pad internally connected to ground.

MIC5357-GFYMME-TR

Mfr. #:
Manufacturer:
Microchip Technology / Micrel
Description:
LDO Voltage Regulators High Performance Dual 500mA ULDO
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union