Manual Switches AML26 Series
Electronic Control Rocker
Honeywell1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada31
LED DISPLAY
Rocker operators ordered separately.
LEDs are not replaceable.
FEATURES
1 Identical to AML24, except furnished
with one or two rectangular high
efficiency LED’s which give flush
display area and wide angle
indication.
1 Available with or without diode
protection for LED’s.
1 LED circuit independent of switch
circuit.
Electrical Data page 19
Rockers page 52
Lamps and LEDs page 58
Accessories page 57
Mounting Dimensions pages 59, 62
1 5 thru 24 VDC LED devices have
internal resistor to maintain current at
nominal 20 mA.
1 UL recognized, CSA certified.
*
*
*AML26 Series: 1 pole and
2-pole only.
AML26 ORDER GUIDE
AML26 F B B 2 AA 01 R X
Housing LED Terminal Type/ Circuitry Operating LED Color LED Color
Type Bezel Color Voltage Diode Protection Codes Action (LED A) (LED B)
AML26 F B B 2 Insert code Insert code RR
1 LED Black V* .110 × .020 letters numbers Red Red
(Solder or as shown in from YY
AML26 G C Quick-Connect Circuitry Operating Yellow Yellow
2 LED’s 5 V Chart Action GG
3 Chart Green Green
D .025 × .025
LED version
XX
10 V (Printed Ckt.,
available
No LED No LED
or Push-On)
only withE
AA15 V 8
BA.110 × .020
CAF w/Diode
DA24 V for LED
circuitryprotection
*See LED application information for devices without current-limiting resistor, page 58.
Example: AML26FBB2AA01RX
Rectangular rocker switch; illuminated
with one LED, this device has a black
bezel, .110 × .020 terminals; with one
circuit ON and one circuit OFF in each
extreme operator position (maintained).
1 The ‘‘MICRO SWITCH’’ identification is
shown on this side of the switch housings.
Rocker
ordered
separately
Manuals
